D7-BX01

Sprecher + Schuh

Sprecher + Schuh D7-BX01 - 22mm Contact Block D7 PB

0 in stock

2CMA166606R1000

ABB Control

2CMA166606R1000 ABB Control - Ind. P&S#332C7W

0 in stock

PILZ-400438

Pilz

Pilz PILZ-400438 is a push-button emergency stop device designed for front panel mounting. It features an E-stop push-button alongside a contact block set, with an operational ambient air temperature range of -25 to +55°C. The device has a net height of 92 mm and incorporates a design with a symbol and logo inscription, protected by a collar. The head diameter is 67mm, with an installation diameter of 22.3mm. It is rated for currents of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. Connection is facilitated through spring-loaded terminal connections. The device offers an IP65 degree of protection and features a round button shape with a rotational release type operating mode, allowing for turning left or right. The button is made from AgNi contact material and is red, with a net width of 68 mm. It can operate within an ambient air temperature range for storage of -50 to +85°C. The PILZ-400438 has no Normally Open (NO) auxiliary contacts but includes 2 Normally Closed (NC) auxiliary contacts with self-monitoring, a response time of 10ms / 0.01 s, a rated insulation voltage (Ui) of 250 V, and is capable of 50,000 operations at no load for mechanical durability.

0 in stock

PILZ-774321

Pilz

Pilz PILZ-774321 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, and limit switch monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm and supports both automatic and manual start modes. It offers rated current safety output contacts ratings of 4A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through fixed screw terminal connections, and it operates on a supply voltage of 20.4-26.4Vac (24Vac nominal) or 20.4-26.4Vdc (24Vdc nominal), belonging to the PNOZ X5J sub-range. The dimensions include a width of 22.5mm and a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and the net width is 22.5 mm. Power consumption is rated at 2 W, with a net depth of 121 mm. Its operating modes include detection of earth faults in the start and input circuit for single-channel operation and additional detection of short circuits in the input circuit for dual-channel operation. It features 2 x instantaneous safety outputs and 2 x digital inputs plus 1 x start input, allowing for the connection of contact expansion modules or external contactors/relays to increase the number of available contacts.

0 in stock

ACS355-03U-17A6-2+B063

ABB Control

Drive, AC, 5HP, 240V, 17.6A, CT, N4X 240Vin 3PH W/DB Trans,Advance Keypad 17.2"Hx9.7"Wx10.9"D ACS355

0 in stock

EM4-32

SAB

SAB EM4-32 Nickel Plated Brass EMC-4 Grounding Gland with M32 threads

0 in stock

1271805

SAB

SC 600 HDTR - 18 AWG/5c, tear resistant high temperature silicone cable, UL, CSA, CE, RoHS

0 in stock

ST203M-Z6NA

ABB Control

ST203M-Z6NA ABB Control - MCB ST200M 3P+NA Z 6A UL1077

0 in stock

D7-BX01

Sprecher + Schuh

Sprecher + Schuh D7-BX01 - 22mm Contact Block D7 PB

0 in stock

2CMA166606R1000

ABB Control

2CMA166606R1000 ABB Control - Ind. P&S#332C7W

0 in stock

PILZ-400438

Pilz

Pilz PILZ-400438 is a push-button emergency stop device designed for front panel mounting. It features an E-stop push-button alongside a contact block set, with an operational ambient air temperature range of -25 to +55°C. The device has a net height of 92 mm and incorporates a design with a symbol and logo inscription, protected by a collar. The head diameter is 67mm, with an installation diameter of 22.3mm. It is rated for currents of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. Connection is facilitated through spring-loaded terminal connections. The device offers an IP65 degree of protection and features a round button shape with a rotational release type operating mode, allowing for turning left or right. The button is made from AgNi contact material and is red, with a net width of 68 mm. It can operate within an ambient air temperature range for storage of -50 to +85°C. The PILZ-400438 has no Normally Open (NO) auxiliary contacts but includes 2 Normally Closed (NC) auxiliary contacts with self-monitoring, a response time of 10ms / 0.01 s, a rated insulation voltage (Ui) of 250 V, and is capable of 50,000 operations at no load for mechanical durability.

0 in stock

PILZ-774321

Pilz

Pilz PILZ-774321 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, and limit switch monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm and supports both automatic and manual start modes. It offers rated current safety output contacts ratings of 4A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through fixed screw terminal connections, and it operates on a supply voltage of 20.4-26.4Vac (24Vac nominal) or 20.4-26.4Vdc (24Vdc nominal), belonging to the PNOZ X5J sub-range. The dimensions include a width of 22.5mm and a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and the net width is 22.5 mm. Power consumption is rated at 2 W, with a net depth of 121 mm. Its operating modes include detection of earth faults in the start and input circuit for single-channel operation and additional detection of short circuits in the input circuit for dual-channel operation. It features 2 x instantaneous safety outputs and 2 x digital inputs plus 1 x start input, allowing for the connection of contact expansion modules or external contactors/relays to increase the number of available contacts.

0 in stock

ACS355-03U-17A6-2+B063

ABB Control

Drive, AC, 5HP, 240V, 17.6A, CT, N4X 240Vin 3PH W/DB Trans,Advance Keypad 17.2"Hx9.7"Wx10.9"D ACS355

0 in stock

EM4-32

SAB

SAB EM4-32 Nickel Plated Brass EMC-4 Grounding Gland with M32 threads

0 in stock

1271805

SAB

SC 600 HDTR - 18 AWG/5c, tear resistant high temperature silicone cable, UL, CSA, CE, RoHS

0 in stock

ST203M-Z6NA

ABB Control

ST203M-Z6NA ABB Control - MCB ST200M 3P+NA Z 6A UL1077

0 in stock

D7-BX01

Sprecher + Schuh

Sprecher + Schuh D7-BX01 - 22mm Contact Block D7 PB

0 in stock

2CMA166606R1000

ABB Control

2CMA166606R1000 ABB Control - Ind. P&S#332C7W

0 in stock

PILZ-400438

Pilz

Pilz PILZ-400438 is a push-button emergency stop device designed for front panel mounting. It features an E-stop push-button alongside a contact block set, with an operational ambient air temperature range of -25 to +55°C. The device has a net height of 92 mm and incorporates a design with a symbol and logo inscription, protected by a collar. The head diameter is 67mm, with an installation diameter of 22.3mm. It is rated for currents of 2A at 24Vdc (DC-13), 3A at 250Vac (AC-15), with a minimum contact current of 5mA and a thermal current (Ith) of 10A. Connection is facilitated through spring-loaded terminal connections. The device offers an IP65 degree of protection and features a round button shape with a rotational release type operating mode, allowing for turning left or right. The button is made from AgNi contact material and is red, with a net width of 68 mm. It can operate within an ambient air temperature range for storage of -50 to +85°C. The PILZ-400438 has no Normally Open (NO) auxiliary contacts but includes 2 Normally Closed (NC) auxiliary contacts with self-monitoring, a response time of 10ms / 0.01 s, a rated insulation voltage (Ui) of 250 V, and is capable of 50,000 operations at no load for mechanical durability.

0 in stock

PILZ-774321

Pilz

Pilz PILZ-774321 is a safety relay designed for single or dual-channel operation with capabilities for safety gate monitoring, instantaneous E-STOP monitoring, and limit switch monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 87 mm and supports both automatic and manual start modes. It offers rated current safety output contacts ratings of 4A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through fixed screw terminal connections, and it operates on a supply voltage of 20.4-26.4Vac (24Vac nominal) or 20.4-26.4Vdc (24Vdc nominal), belonging to the PNOZ X5J sub-range. The dimensions include a width of 22.5mm and a degree of protection rated at IP40. The housing is made of PPO with an ABS front, and the net width is 22.5 mm. Power consumption is rated at 2 W, with a net depth of 121 mm. Its operating modes include detection of earth faults in the start and input circuit for single-channel operation and additional detection of short circuits in the input circuit for dual-channel operation. It features 2 x instantaneous safety outputs and 2 x digital inputs plus 1 x start input, allowing for the connection of contact expansion modules or external contactors/relays to increase the number of available contacts.

0 in stock