7899-HGI

Leviton

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, SmartLock Pro Duplex Receptacle, Straight Blade, Hospital Grade, GFCI Ground Fault, Monochromatic, w/Indicator Light, Back & Side 20A Feed-Thru Wired, Steel Strap - Ivory

3 in stock

LE2-12-3503

Sprecher + Schuh

Sprecher + Schuh LE2-12-3503 - LE2 Panel Mount Cam Switch, 12A, 3-Pole, Two Position w/OFF 1-0-2 60 deg

0 in stock

40.52.8.120.0000

Finder

Finder 40.52.8.120.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 2C/O / DPDT (Double Pole Double Throw), operates within an ambient air temperature range of -40 to +85 degrees Celsius for both operation and storage, and is rated for 400VA at 230Vac (AC-15) and 2000VA at 250Vac (AC-1) for ambient air temperature operation. The rated voltage for AC operation is specified with protection functions at 250Vac, a control voltage (AC) of 6 kV, and a rated active power of 2 poles. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 12.4 mm, with a color code of 120Vac (50Hz/60Hz). The relay is designed for PCB or plug-in mounting with a visual position indicator of 5.3mm pins pitch, capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The contact material is AgNi (Silver Nickel), indicating its suitability for a wide range of applications.

1 in stock

ET-8MG-MIL-1

Red Lion

Red Lion ET-8MG-MIL-1 is an Ethernet Switch designed for surface bulkhead mounting with a metallic case. It operates within an ambient air temperature range of -40 to +75°C and offers a degree of protection rated at IP67. This part of the Sixnet ET series features managed Ethernet switch capabilities, including SNMP v1, v2, v3, RMON, TFTP, STP, RSTP, QoS/CoS/ToS/DS, IGMPv1/v2, VLAN (tag and port-based), HTTP/HTTPS (SSL and TLS), Telnet, SSH, Modbus/TCP, and CLI Interface. It is equipped with 16 MIL-STD-38999 series III connectors supporting 10/100/1000BaseTX for connectivity and requires a supply voltage of 18-30Vdc (24Vdc). The communication protocol used is Ethernet, and it has a connection capacity of 16 ports.

0 in stock

ZAF460-70

ABB Control

ZAF460-70 ABB Control - COIL AF400-AF460 100-250VAC/DC

8 in stock

CS7E-B22E-24E

Sprecher + Schuh

Sprecher + Schuh CS7E-B22E-24E - CS7 Control Relay 4-Pole Bifurcated, 2NO 2NC, 24V DC Elec. Coil

0 in stock

DC3332218S

SAB

DC 105 C - 22 AWG/18c, shielded flexible oil resistant data cable, UL, CSA, CE, RoHS

0 in stock

PILZ-837285

Pilz

Pilz PILZ-837285 is a protection unit designed for 3-phase voltage monitoring, including overvoltage and undervoltage monitoring functions. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -15 to +55°C. The unit has a net height of 87 mm and supports safety output contacts ratings from 0.1A to 5A at 24Vdc (DC-1; 120W) and 1.5A at 24Vdc (DC-13) with fixed screw terminal connections. The S3UM sub-range model features dimensions of W22.5mm x D122 mm, an IP40 degree of protection, and a supply voltage range of 20.4-26.4Vdc (24Vdc nominal). It operates at a frequency range of 40-400Hz, with a power consumption of 1.5 W, and is constructed with a PPO housing. This unit is designed for a 3-phase (3AC) input network with a rated voltage (AC) of 500/550Vac measuring voltage and a net width of 22.5 mm. It offers operating modes including fault latching/non-latching and normally energized/de-energized modes, with an ambient air temperature range for storage of -40 to +85°C. The device includes 1 x delayed auxiliary output (SPDT-NO/NC contacts; 0.1-5A 24Vdc DC-1 resistive load; 0.5-10s time-delay selectable) and 1 x analog input for L1-L3 voltage measurement. Protection functions cover undervoltage, overvoltage, phase sequence, phase failure, and asymmetry, with 1 x automatic reset and 1 x switching commutation digital inputs.

0 in stock

7899-HGI

Leviton

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, SmartLock Pro Duplex Receptacle, Straight Blade, Hospital Grade, GFCI Ground Fault, Monochromatic, w/Indicator Light, Back & Side 20A Feed-Thru Wired, Steel Strap - Ivory

3 in stock

LE2-12-3503

Sprecher + Schuh

Sprecher + Schuh LE2-12-3503 - LE2 Panel Mount Cam Switch, 12A, 3-Pole, Two Position w/OFF 1-0-2 60 deg

0 in stock

40.52.8.120.0000

Finder

Finder 40.52.8.120.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 2C/O / DPDT (Double Pole Double Throw), operates within an ambient air temperature range of -40 to +85 degrees Celsius for both operation and storage, and is rated for 400VA at 230Vac (AC-15) and 2000VA at 250Vac (AC-1) for ambient air temperature operation. The rated voltage for AC operation is specified with protection functions at 250Vac, a control voltage (AC) of 6 kV, and a rated active power of 2 poles. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 12.4 mm, with a color code of 120Vac (50Hz/60Hz). The relay is designed for PCB or plug-in mounting with a visual position indicator of 5.3mm pins pitch, capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The contact material is AgNi (Silver Nickel), indicating its suitability for a wide range of applications.

1 in stock

ET-8MG-MIL-1

Red Lion

Red Lion ET-8MG-MIL-1 is an Ethernet Switch designed for surface bulkhead mounting with a metallic case. It operates within an ambient air temperature range of -40 to +75°C and offers a degree of protection rated at IP67. This part of the Sixnet ET series features managed Ethernet switch capabilities, including SNMP v1, v2, v3, RMON, TFTP, STP, RSTP, QoS/CoS/ToS/DS, IGMPv1/v2, VLAN (tag and port-based), HTTP/HTTPS (SSL and TLS), Telnet, SSH, Modbus/TCP, and CLI Interface. It is equipped with 16 MIL-STD-38999 series III connectors supporting 10/100/1000BaseTX for connectivity and requires a supply voltage of 18-30Vdc (24Vdc). The communication protocol used is Ethernet, and it has a connection capacity of 16 ports.

0 in stock

ZAF460-70

ABB Control

ZAF460-70 ABB Control - COIL AF400-AF460 100-250VAC/DC

8 in stock

CS7E-B22E-24E

Sprecher + Schuh

Sprecher + Schuh CS7E-B22E-24E - CS7 Control Relay 4-Pole Bifurcated, 2NO 2NC, 24V DC Elec. Coil

0 in stock

DC3332218S

SAB

DC 105 C - 22 AWG/18c, shielded flexible oil resistant data cable, UL, CSA, CE, RoHS

0 in stock

PILZ-837285

Pilz

Pilz PILZ-837285 is a protection unit designed for 3-phase voltage monitoring, including overvoltage and undervoltage monitoring functions. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -15 to +55°C. The unit has a net height of 87 mm and supports safety output contacts ratings from 0.1A to 5A at 24Vdc (DC-1; 120W) and 1.5A at 24Vdc (DC-13) with fixed screw terminal connections. The S3UM sub-range model features dimensions of W22.5mm x D122 mm, an IP40 degree of protection, and a supply voltage range of 20.4-26.4Vdc (24Vdc nominal). It operates at a frequency range of 40-400Hz, with a power consumption of 1.5 W, and is constructed with a PPO housing. This unit is designed for a 3-phase (3AC) input network with a rated voltage (AC) of 500/550Vac measuring voltage and a net width of 22.5 mm. It offers operating modes including fault latching/non-latching and normally energized/de-energized modes, with an ambient air temperature range for storage of -40 to +85°C. The device includes 1 x delayed auxiliary output (SPDT-NO/NC contacts; 0.1-5A 24Vdc DC-1 resistive load; 0.5-10s time-delay selectable) and 1 x analog input for L1-L3 voltage measurement. Protection functions cover undervoltage, overvoltage, phase sequence, phase failure, and asymmetry, with 1 x automatic reset and 1 x switching commutation digital inputs.

0 in stock

7899-HGI

Leviton

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, SmartLock Pro Duplex Receptacle, Straight Blade, Hospital Grade, GFCI Ground Fault, Monochromatic, w/Indicator Light, Back & Side 20A Feed-Thru Wired, Steel Strap - Ivory

3 in stock

LE2-12-3503

Sprecher + Schuh

Sprecher + Schuh LE2-12-3503 - LE2 Panel Mount Cam Switch, 12A, 3-Pole, Two Position w/OFF 1-0-2 60 deg

0 in stock

40.52.8.120.0000

Finder

Finder 40.52.8.120.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 2C/O / DPDT (Double Pole Double Throw), operates within an ambient air temperature range of -40 to +85 degrees Celsius for both operation and storage, and is rated for 400VA at 230Vac (AC-15) and 2000VA at 250Vac (AC-1) for ambient air temperature operation. The rated voltage for AC operation is specified with protection functions at 250Vac, a control voltage (AC) of 6 kV, and a rated active power of 2 poles. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 12.4 mm, with a color code of 120Vac (50Hz/60Hz). The relay is designed for PCB or plug-in mounting with a visual position indicator of 5.3mm pins pitch, capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The contact material is AgNi (Silver Nickel), indicating its suitability for a wide range of applications.

1 in stock

ET-8MG-MIL-1

Red Lion

Red Lion ET-8MG-MIL-1 is an Ethernet Switch designed for surface bulkhead mounting with a metallic case. It operates within an ambient air temperature range of -40 to +75°C and offers a degree of protection rated at IP67. This part of the Sixnet ET series features managed Ethernet switch capabilities, including SNMP v1, v2, v3, RMON, TFTP, STP, RSTP, QoS/CoS/ToS/DS, IGMPv1/v2, VLAN (tag and port-based), HTTP/HTTPS (SSL and TLS), Telnet, SSH, Modbus/TCP, and CLI Interface. It is equipped with 16 MIL-STD-38999 series III connectors supporting 10/100/1000BaseTX for connectivity and requires a supply voltage of 18-30Vdc (24Vdc). The communication protocol used is Ethernet, and it has a connection capacity of 16 ports.

0 in stock