Advantage Electric Supply Logo

60.63.8.024.0000 Finder Control Relays

60.63.8.024.0000 on Advantage Electric Supply
Finder

Part#:60.63.8.024.0000

Manufacturer:Finder

Category:Control Relays

Product Lifecycle:Active

Product description

General purpose electromechanical relay - Finder (60 series) - Control coil voltage 24Vac (50Hz/60Hz) - 3 poles (3P) - 3C/O / 3PDT (3 Pole Double Throw) contact - Rated current 10A (250Vac; AC-1) / 10A (30Vdc; DC-1) - Rated switching power 500VA (230Vac;

Product Details

  • Main function
    Relay
  • Connection type
    Fast-on 187
  • Control Voltage (AC)
    24Vac (50Hz/60Hz)
  • Mechanical durability (at no load)
    20 000 000 operations
  • Primary brand
    Finder
  • Poles
    3 Pole(s)
  • Compliant with standard(s)
    cURus Lloyd Register (LR) CCC RINA IMQ CSA VDE EAC CE EN 60664-1 EN 61000-4-5 EN 61810-1
  • Rated current
    10A (250Vac; AC-1) 10A (30Vdc; DC-1) 0.4A (110Vdc; DC-1) 0.15A (220Vdc; DC-1)
  • Contacts type
    3C/O / 3PDT (3 Pole Double Throw)
  • Power consumption
    1.3 W
  • Rated voltage (AC)
    250Vac
  • Mounting mode
    Plug-in Soldering
  • Electrical durability (with load)
    200 000 operations
  • Rated impulse voltage (Uimp)
    3.6 kV
  • Product series / family name
    60 series
  • Rated power
    500VA (230Vac; AC-15) 2500VA (250Vac; AC-1) 1.3W
  • Ambient air temperature for operation
    -40...+70 °C
  • Contacts coating
    AgNi (Silver Nickel)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

60.63.8.024.0000 Related Documents

Finder - 60 Series - Catalogue.pdf

Similar products from: Finder Control Relays

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Finder

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

6 in stock
94.13SMA on Advantage Electric Supply

94.13SMA

Finder

Plug-in PCB socket with metallic retaining / release clip - Finder - Rated current 10A - Solder pin connections - PCB mounting - Blue color - IP20

30 in stock
99.02.0.230.98 on Advantage Electric Supply

99.02.0.230.98

Finder

Finder 99.02.0.230.98 is a suppressor module designed for use with a rated voltage of 110-240Vdc and a control voltage of 110-240Vac. It features a plug-in connection type and is characterized by its white power consumption indicator.

3 in stock
56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Finder

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

1 in stock
56.34.9.024.0000 on Advantage Electric Supply

56.34.9.024.0000

Finder

Finder 56.34.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 4C/O or 4PDT (4 Pole Double Throw), operates within an ambient air temperature range of -40 to +70 degrees Celsius for both operation and storage, and has a rated voltage of 24Vdc. The relay is equipped with protection functions rated at 250Vac, a control voltage (AC) of 4 kV, and a rated active power of 4 poles. It features a plug-in design for residual current sensitivity, is capable of 100,000 operations for Normally Closed (NC) circuits, and has a durability of 50,000,000 operations. The contacts are made of AgNi (Silver Nickel), ensuring compatibility with various applications.

4 in stock
62.23.9.012.0000 on Advantage Electric Supply

62.23.9.012.0000

Finder

Finder 62.23.9.012.0000 is a relay with solder pin connection type, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures for operation and storage from -40 to +70 degrees Celsius. The relay supports a rated voltage of 250Vac, with a control voltage (AC) of 4 kV and is rated for active power (kW) for 3 poles. It features PCB residual current sensitivity, is designed for up to 100,000 operations for Normally Closed (NC) circuits, and can endure up to 30,000,000 operations overall. The relay's contacts are made from AgCdO (Silver Cadmium Oxide), indicating its suitability for a wide range of applications.

8 in stock

Manufacturer warranty

60.63.8.024.0000 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

Compare 60.63.8.024.0000 with other Control Relays products

Main function

Connection type

Control Voltage (AC)

Mechanical durability (at...

Primary brand

Poles

Compliant with standard(s...

Rated current

Contacts type

Power consumption

Selected product

60.63.8.024.0000
Backordered
60.63.8.024.0000
Finder

General purpose electromechanical relay - Finder (60 series) - Control coil voltage 24Vac (50Hz/60Hz...

Main functionRelay

Connection typeFast-on 187

Control Voltage (AC)24Vac (50Hz/60Hz)

Mechanical durability (at no load)20 000 000 operations

Primary brandFinder

Poles3 Pole(s)

Compliant with standard(s)cURus Lloyd Register (LR) CC...

Rated current10A (250Vac; AC-1) 10A (30Vd...

Contacts type3C/O / 3PDT (3 Pole Double T...

Power consumption1.3 W

60.13.9.024.0070
18 in stock
60.13.9.024.0070
Finder

Finder 60.13.9.024.0070 is a relay with a solder pin connection type, designed for a rated current o...

Main functionRelay

Connection typeSolder pin

Control Voltage (AC)-

Mechanical durability (at no load)-

Primary brandFinder

Poles3 Pole(s)

Compliant with standard(s)-

Rated current10A (250Vac; AC-1) 10A (30Vd...

Contacts type3C/O / 3PDT (3 Pole Double T...

Power consumption-

60.12.8.012.0040
7 in stock
60.12.8.012.0040
Finder

Finder 60.12.8.012.0040 is a relay with solder pin connection type, designed for a rated current of ...

Main functionRelay

Connection typeSolder pin

Control Voltage (AC)12Vac (50Hz/60Hz)

Mechanical durability (at no load)-

Primary brandFinder

Poles2 Pole(s)

Compliant with standard(s)-

Rated current10A (250Vac; AC-1) 10A (30Vd...

Contacts type2C/O / DPDT (Double Pole Dou...

Power consumption-

About the manufacturer

Finder

Advantage Electric Supply is an authorized Finder distributor, proud to partner with a renowned manufacturer that specializes in providing innovative and high-quality industrial automation and electromechanical products. Finder has carved its niche in the industry by offering an extensive range of reliable components designed to meet diverse automation and electrical control needs. With over 65 ye...

Recently viewed products

QS10.121 on Advantage Electric Supply

QS10.121

Puls

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

0 in stock

Relevant products

60.12.9.024.0000 on Advantage Electric Supply

60.12.9.024.0000

Verified stock: 1

Finder 60.12.9.024.0000 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1), 10A at 30Vdc, 0.4A at 110Vdc, and 0.15A at 220Vdc under DC-1 conditions. It features normally open (NO) auxiliary contacts for DC-1, with a supply voltage specification of 2C/O / DPDT (Double Pole Double Throw). The relay operates within an ambient air temperature range of -40 to +70 degrees Celsius and has a rated voltage of 24Vdc. It is equipped with protection functions rated at 250Vac, a net depth of 66.7 mm, and a control voltage of 4 kV. The mounting mode is specified at 32.5 mm with a 2 Pole(s) rated active power, and a power consumption dimension of 36.4 mm. It supports a plug-in (octal, 8-pins) mounting style, with normally closed (NC) auxiliary contacts rated at 1.3 W. The rated voltage (AC) for phase-to-phase operations is designed for 200,000 operations, with a mechanical resistance of AgNi (Silver Nickel) and power dissipation/losses capable of 50,000,000 operations.

Finder

56.34.8.024.0000 on Advantage Electric Supply

56.34.8.024.0000

Verified stock: 1

Finder 56.34.8.024.0000 is a relay with a connection type of Fast-on 187, designed to handle rated currents of 12A at 250Vac (AC-1) and 12A at 30Vdc, with lower ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 4C/O or 4PDT (4 Pole Double Throw), suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage. This relay supports a communication protocol labeled as C and offers protection functions at 250Vac, with a control voltage (AC) of 4 kV. It is rated for an active power of 4 poles and comes in a color corresponding to a 24Vac (50Hz/60Hz) supply. The design includes plug-in residual current sensitivity, supports up to 100,000 operations for Normally Closed (NC) circuits, and is capable of 20,000,000 operations overall. The contacts are made of AgNi (Silver Nickel), ensuring durability and longevity.

Finder

60.12.8.012.0040 on Advantage Electric Supply

60.12.8.012.0040

Verified stock: 7

Finder 60.12.8.012.0040 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1) and 10A at 30Vdc (DC-1), with lower current ratings of 0.4A at 110Vdc and 0.15A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is capable of handling ambient air temperatures from -40 to +70 degrees Celsius for operation and storage. This relay features a rated voltage of 250Vac, a control voltage of 4 kV, and is designed for plug-in mounting with 8-pins. It has a net depth of 66.7 mm, a mounting mode width of 32.5 mm, and a power consumption width of 36.4 mm. The relay is equipped with Normally Closed (NC) auxiliary contacts rated at 1.3 W, supports a mechanical resistance of up to 200,000 operations, and is constructed with AgNi (Silver Nickel) contacts. Its color is specified for a 12Vac (50Hz/60Hz) operation.

Finder

56.32.8.120.0040 on Advantage Electric Supply

56.32.8.120.0040

Verified stock: 2

Finder 56.32.8.120.0040 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at both 250Vac (AC-1) and 30Vdc (DC-1), with lower ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It features a supply voltage of 2C/O / DPDT (Double Pole Double Throw), capable of operating within an ambient air temperature range of -40 to +70 degrees Celsius and supports a control voltage (AC) of 4 kV. The rated active power is specified for 2 poles, and it has a color coding for 120Vac (50Hz/60Hz) operations. The relay is designed for plug-in mounting, with a durability of 100,000 operations for Normally Closed (NC) circuits and a mechanical life expectancy of 20,000,000 operations. The contact material is AgNi (Silver Nickel), indicating its suitability for a wide range of applications.

Finder

FAQ

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

General purpose electromechanical relay - Finder (60 series) - Control coil voltage 24Vac (50Hz/60Hz) - 3 poles (3P) - 3C/O / 3PDT (3 Pole Double Throw) contact - Rated current 10A (250Vac; AC-1) / 10A (30Vdc; DC-1) - Rated switching power 500VA (230Vac;

Similar products from: Control Relays

This item can ship within 24h!

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Verified stock: 6

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

Finder

This item can ship within 24h!

56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Verified stock: 1

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

Finder

What can I help you find today?

Recommended parts