Advantage Electric Supply Logo

62.32.8.110.0050 Finder Control Relays

62.32.8.110.0050 on Advantage Electric Supply
Finder

Part#:62.32.8.110.0050

Manufacturer:Finder

Category:Control Relays

Product Lifecycle:Active

Product description

Electromechanical power relay with lockable test button + LED indicator - Finder (62 series) - Control coil voltage 110Vac (50Hz/60Hz) - 2 poles (2P) - 2C/O / DPDT (Double Pole Double Throw) contact - Rated current 16A (250Vac; AC-1) / 16A (30Vdc; DC-1) -

Product Details

  • Mounting mode
    Plug-in
  • Ambient air temperature for operation
    -40...+70 °C
  • Contacts coating
    AgCdO (Silver Cadmium Oxide)
  • Poles
    2 Pole(s)
  • Compliant with standard(s)
    cURus Lloyd Register (LR) CCC RINA IMQ CSA VDE EAC CE EN 60664-1 EN 61000-4-4 EN 61000-4-5 EN 61810-1
  • Rated impulse voltage (Uimp)
    4 kV
  • Connection type
    Fast-on 187
  • Contacts type
    2C/O / DPDT (Double Pole Double Throw)
  • Rated voltage (AC)
    250Vac
  • Mechanical durability (at no load)
    10 000 000 operations
  • Primary brand
    Finder
  • Rated power
    750VA (230Vac; AC-15) 4000VA (250Vac; AC-1)
  • Main function
    Relay
  • Rated current
    16A (250Vac; AC-1) 16A (30Vdc; DC-1) 0.6A (110Vdc; DC-1) 0.4A (220Vdc; DC-1)
  • Control Voltage (AC)
    110Vac (50Hz/60Hz)
  • Electrical durability (with load)
    100 000 operations
  • Product series / family name
    62 series

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

62.32.8.110.0050 Related Documents

Finder - 62 Series - Catalogue.pdf

Similar products from: Finder Control Relays

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Finder

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

6 in stock
94.13SMA on Advantage Electric Supply

94.13SMA

Finder

Plug-in PCB socket with metallic retaining / release clip - Finder - Rated current 10A - Solder pin connections - PCB mounting - Blue color - IP20

30 in stock
99.02.0.230.98 on Advantage Electric Supply

99.02.0.230.98

Finder

Finder 99.02.0.230.98 is a suppressor module designed for use with a rated voltage of 110-240Vdc and a control voltage of 110-240Vac. It features a plug-in connection type and is characterized by its white power consumption indicator.

3 in stock
56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Finder

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

1 in stock
56.34.9.024.0000 on Advantage Electric Supply

56.34.9.024.0000

Finder

Finder 56.34.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 4C/O or 4PDT (4 Pole Double Throw), operates within an ambient air temperature range of -40 to +70 degrees Celsius for both operation and storage, and has a rated voltage of 24Vdc. The relay is equipped with protection functions rated at 250Vac, a control voltage (AC) of 4 kV, and a rated active power of 4 poles. It features a plug-in design for residual current sensitivity, is capable of 100,000 operations for Normally Closed (NC) circuits, and has a durability of 50,000,000 operations. The contacts are made of AgNi (Silver Nickel), ensuring compatibility with various applications.

4 in stock
62.23.9.012.0000 on Advantage Electric Supply

62.23.9.012.0000

Finder

Finder 62.23.9.012.0000 is a relay with solder pin connection type, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures for operation and storage from -40 to +70 degrees Celsius. The relay supports a rated voltage of 250Vac, with a control voltage (AC) of 4 kV and is rated for active power (kW) for 3 poles. It features PCB residual current sensitivity, is designed for up to 100,000 operations for Normally Closed (NC) circuits, and can endure up to 30,000,000 operations overall. The relay's contacts are made from AgCdO (Silver Cadmium Oxide), indicating its suitability for a wide range of applications.

8 in stock

Manufacturer warranty

62.32.8.110.0050 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

Compare 62.32.8.110.0050 with other Control Relays products

Mounting mode

Ambient air temperature f...

Contacts coating

Poles

Compliant with standard(s...

Rated impulse voltage (Ui...

Connection type

Contacts type

Rated voltage (AC)

Mechanical durability (at...

Selected product

62.32.8.110.0050
Backordered
62.32.8.110.0050
Finder

Electromechanical power relay with lockable test button + LED indicator - Finder (62 series) - Contr...

Mounting modePlug-in

Ambient air temperature for operation-40...+70 °C

Contacts coatingAgCdO (Silver Cadmium Oxide)...

Poles2 Pole(s)

Compliant with standard(s)cURus Lloyd Register (LR) CC...

Rated impulse voltage (Uimp)4 kV

Connection typeFast-on 187

Contacts type2C/O / DPDT (Double Pole Dou...

Rated voltage (AC)250Vac

Mechanical durability (at no load)10 000 000 operations

56.32.8.024.0000
3 in stock
56.32.8.024.0000
Finder

Finder 56.32.8.024.0000 is a relay with a connection type of Fast-on 187, designed to handle rated c...

Mounting modePlug-in

Ambient air temperature for operation-40...+70 °C

Contacts coating-

Poles2 Pole(s)

Compliant with standard(s)-

Rated impulse voltage (Uimp)-

Connection typeFast-on 187

Contacts type2C/O / DPDT (Double Pole Dou...

Rated voltage (AC)250Vac

Mechanical durability (at no load)-

56.32.8.120.0040
2 in stock
56.32.8.120.0040
Finder

Finder 56.32.8.120.0040 is a relay with a connection type of Fast-on 187, designed for a rated curre...

Mounting modePlug-in

Ambient air temperature for operation-40...+70 °C

Contacts coating-

Poles2 Pole(s)

Compliant with standard(s)-

Rated impulse voltage (Uimp)-

Connection typeFast-on 187

Contacts type2C/O / DPDT (Double Pole Dou...

Rated voltage (AC)250Vac

Mechanical durability (at no load)-

About the manufacturer

Finder

Advantage Electric Supply is an authorized Finder distributor, proud to partner with a renowned manufacturer that specializes in providing innovative and high-quality industrial automation and electromechanical products. Finder has carved its niche in the industry by offering an extensive range of reliable components designed to meet diverse automation and electrical control needs. With over 65 ye...

Recently viewed products

QS10.121 on Advantage Electric Supply

QS10.121

Puls

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

0 in stock

Relevant products

62.32.8.120.0000 on Advantage Electric Supply

62.32.8.120.0000

Verified stock: 1

Finder 62.32.8.120.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 2C/O / DPDT (Double Pole Double Throw), operates within an ambient air temperature range of -40 to +70 degrees Celsius for both operation and storage, and is designed for a control voltage of 120Vac (50Hz/60Hz). The relay features a protection function with a control voltage (AC) of 4 kV and is rated for 250Vac. It has a rated active power of 2 poles and is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The relay's contacts are made of AgCdO (Silver Cadmium Oxide), indicating its suitability for various applications requiring reliable switching.

Finder

62.33.9.125.0000 on Advantage Electric Supply

62.33.9.125.0000

Verified stock: 0

Finder 62.33.9.125.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage. The relay supports a communication protocol of type C, has a rated voltage of 125Vdc for its poles, and offers protection functions at 250Vac. Its control voltage (AC) is rated at 4 kV, with a rated active power of 3 poles. The design includes plug-in residual current sensitivity, and it is capable of 100,000 operations for Normally Closed (NC) circuits, with a lifespan of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide), and the dimensions include a length specified by the design requirements.

Finder

62.33.9.024.0006 on Advantage Electric Supply

62.33.9.024.0006

Verified stock: 0

Finder 62.33.9.024.0006 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for both operation and storage. The relay supports a rated voltage of 24Vdc and a control voltage (AC) of 4 kV, with a rated active power of 3 poles. It features rear flange for residual current sensitivity, is capable of 100,000 operations for Normally Closed (NC) circuits, and has a mechanical endurance of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide).

Finder

62.32.9.048.0000 on Advantage Electric Supply

62.32.9.048.0000

Verified stock: 0

Finder 62.32.9.048.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc, with a reduced current rating of 0.6A at 110Vdc and 0.4A at 220Vdc for DC-1 design. It features Normally Open (NO) auxiliary contacts for DC-1 applications. The supply voltage is specified for 2C/O or DPDT (Double Pole Double Throw) configurations, with an ambient air temperature for operation at 750VA (230Vac, AC-15) and for storage at 4000VA (250Vac, AC-1). The rated voltage for AC operation is supported up to 250Vac, with a control voltage (AC) tolerance of 4 kV. It is designed for a rated active power of 2 poles, with plug-in residual current sensitivity. The relay supports up to 100,000 operations for Normally Closed (NC) circuits and has a mechanical endurance of 30,000,000 operations. The contact material is AgCdO (Silver Cadmium Oxide), indicating its suitability for various applications within its specified ambient air temperature range for operation and storage of -40 to +70 degrees Celsius. The relay operates with a communication protocol of type C, is designed for a supply voltage of 48Vdc, and offers protection functions at 250Vac.

Finder

62.32.9.024.4060 on Advantage Electric Supply

62.32.9.024.4060

Verified stock: 0

Finder 62.32.9.024.4060 is a relay with a connection type of Fast-on 187, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation, and has a rated voltage for AC applications. The relay supports a communication protocol of type C, is designed for use with a control voltage (AC) of 4 kV, and has a rated active power of 2 poles. It features plug-in residual current sensitivity, a cross-section designed for diode use, and is capable of 100,000 operations for Normally Closed (NC) circuits, with a durability of 30,000,000 operations. The contact material is AgSnO2 (Silver / Tin Oxide).

Finder

FAQ

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Electromechanical power relay with lockable test button + LED indicator - Finder (62 series) - Control coil voltage 110Vac (50Hz/60Hz) - 2 poles (2P) - 2C/O / DPDT (Double Pole Double Throw) contact - Rated current 16A (250Vac; AC-1) / 16A (30Vdc; DC-1) -

Similar products from: Control Relays

This item can ship within 24h!

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Verified stock: 6

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

Finder

This item can ship within 24h!

56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Verified stock: 1

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

Finder

What can I help you find today?

Recommended parts