Advantage Electric Supply Logo

65.31.8.110.0000 Finder Control Relays

65.31.8.110.0000 on Advantage Electric Supply
Finder

Part#:65.31.8.110.0000

Manufacturer:Finder

Category:Control Relays

Product Lifecycle:Active

Product description

Finder 65.31.8.110.0000 is a relay designed with 1 Normally Open (NO) pole, featuring a fast-on 250 connection type. It supports a rated current of 20A at both 250Vac (AC-1) and 30Vdc (DC-1), with lower currents of 0.8A at 110Vdc and 0.5A at 220Vdc for Normally Open (NO) auxiliary contacts. The supply voltage is specified for 1NO / SPST-NO configurations, with an ambient air temperature for operation at 1000VA (230Vac) and for storage at 5000VA (250Vac). The rated voltage for AC operation is not specified, but the ambient air temperature range for operation is -40 to +75 degrees Celsius. It uses a communication protocol labeled as C and offers protection functions at 250Vac. The net depth of the part is 42.2 mm, with a control voltage (AC) of 4 kV and a mounting mode depth of 32.2 mm. The rated active power is for 1 pole, with a power consumption depth of 36.5 mm. The color is specified for 110Vac (50Hz/60Hz) operations, with a rear flange mounting for residual current sensitivity. It is designed for up to 50,000 operations for Normally Closed (NC) circuits and has a lifespan of 10,000,000 operations. The length is made of AgCdO (Silver Cadmium Oxide), with a diameter indicating robust usage capacity.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Finder Control Relays

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Finder

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

6 in stock
94.13SMA on Advantage Electric Supply

94.13SMA

Finder

Plug-in PCB socket with metallic retaining / release clip - Finder - Rated current 10A - Solder pin connections - PCB mounting - Blue color - IP20

30 in stock
99.02.0.230.98 on Advantage Electric Supply

99.02.0.230.98

Finder

Finder 99.02.0.230.98 is a suppressor module designed for use with a rated voltage of 110-240Vdc and a control voltage of 110-240Vac. It features a plug-in connection type and is characterized by its white power consumption indicator.

3 in stock
56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Finder

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

1 in stock
56.34.9.024.0000 on Advantage Electric Supply

56.34.9.024.0000

Finder

Finder 56.34.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It supports a supply voltage of 4C/O or 4PDT (4 Pole Double Throw), operates within an ambient air temperature range of -40 to +70 degrees Celsius for both operation and storage, and has a rated voltage of 24Vdc. The relay is equipped with protection functions rated at 250Vac, a control voltage (AC) of 4 kV, and a rated active power of 4 poles. It features a plug-in design for residual current sensitivity, is capable of 100,000 operations for Normally Closed (NC) circuits, and has a durability of 50,000,000 operations. The contacts are made of AgNi (Silver Nickel), ensuring compatibility with various applications.

4 in stock
62.23.9.012.0000 on Advantage Electric Supply

62.23.9.012.0000

Finder

Finder 62.23.9.012.0000 is a relay with solder pin connection type, designed for a rated current of 16A at 250Vac (AC-1) and 16A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.4A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O or 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures for operation and storage from -40 to +70 degrees Celsius. The relay supports a rated voltage of 250Vac, with a control voltage (AC) of 4 kV and is rated for active power (kW) for 3 poles. It features PCB residual current sensitivity, is designed for up to 100,000 operations for Normally Closed (NC) circuits, and can endure up to 30,000,000 operations overall. The relay's contacts are made from AgCdO (Silver Cadmium Oxide), indicating its suitability for a wide range of applications.

8 in stock

Manufacturer warranty

65.31.8.110.0000 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

About the manufacturer

Finder

Advantage Electric Supply is an authorized Finder distributor, proud to partner with a renowned manufacturer that specializes in providing innovative and high-quality industrial automation and electromechanical products. Finder has carved its niche in the industry by offering an extensive range of reliable components designed to meet diverse automation and electrical control needs. With over 65 ye...

Recently viewed products

QS10.121 on Advantage Electric Supply

QS10.121

Puls

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

0 in stock

Relevant products

65.31.8.120.0300 on Advantage Electric Supply

65.31.8.120.0300

Verified stock: 0

Finder 65.31.8.120.0300 is a relay designed with 1 Normally Open (NO) pole and 1 Normally Closed (NC) auxiliary contact, suitable for fast-on 250 connection types. It is rated for currents up to 30A at 250Vac (AC-1) and 30A at 30Vdc, with lower current ratings of 1.1A at 110Vdc and 0.7A at 220Vdc (DC-1). The supply voltage is specified for AC operations with a 1NO+1NC configuration. This relay operates efficiently within an ambient air temperature range of -40 to +75 degrees Celsius and is designed for mounting with a rear flange. It features a net depth of 42.2 mm, a control voltage tolerance of up to 4 kV, and a rated active power for 2 poles. The power consumption is noted for a 120Vac (50Hz/60Hz) supply. The relay's contacts are made from AgCdO (Silver Cadmium Oxide), ensuring durability for up to 10,000,000 operations, with a mechanical endurance of 50,000 operations. The protection functions are rated at 250Vac, and the product is designed to be replaced by a model with similar specifications.

Finder

65.31.9.012.0300 on Advantage Electric Supply

65.31.9.012.0300

Verified stock: 0

Finder 65.31.9.012.0300 is a relay with 1 Normally Open (NO) pole and 1 Normally Closed (NC) auxiliary contact, designed for fast-on 250 connection. It supports a rated current of 30A for both 250Vac (AC-1) and 30Vdc (DC-1), with lower currents of 1.1A at 110Vdc and 0.7A at 220Vdc (DC-1) respectively. The supply voltage is specified for AC operations with a 1NO+1NC configuration. This relay operates within an ambient air temperature range of -40 to +75 degrees Celsius and is designed for a mounting depth of 42.2 mm, width of 32.2 mm, and height of 36.5 mm. It features a control voltage of 4 kV, rated active power of 2 poles, and is equipped with rear flange mounting mode. The relay's contacts are made from AgCdO (Silver Cadmium Oxide) to handle up to 30 000 000 operations, and it is designed to replace products with 1 NC pole(s) after 50 000 operations.

Finder

FAQ

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Finder 65.31.8.110.0000 is a relay designed with 1 Normally Open (NO) pole, featuring a fast-on 250 connection type. It supports a rated current of 20A at both 250Vac (AC-1) and 30Vdc (DC-1), with lower currents of 0.8A at 110Vdc and 0.5A at 220Vdc for Normally Open (NO) auxiliary contacts. The supply voltage is specified for 1NO / SPST-NO configurations, with an ambient air temperature for operation at 1000VA (230Vac) and for storage at 5000VA (250Vac). The rated voltage for AC operation is not specified, but the ambient air temperature range for operation is -40 to +75 degrees Celsius. It uses a communication protocol labeled as C and offers protection functions at 250Vac. The net depth of the part is 42.2 mm, with a control voltage (AC) of 4 kV and a mounting mode depth of 32.2 mm. The rated active power is for 1 pole, with a power consumption depth of 36.5 mm. The color is specified for 110Vac (50Hz/60Hz) operations, with a rear flange mounting for residual current sensitivity. It is designed for up to 50,000 operations for Normally Closed (NC) circuits and has a lifespan of 10,000,000 operations. The length is made of AgCdO (Silver Cadmium Oxide), with a diameter indicating robust usage capacity.

Similar products from: Control Relays

This item can ship within 24h!

38.21.0.024.0060 on Advantage Electric Supply

38.21.0.024.0060

Verified stock: 6

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

Finder

This item can ship within 24h!

56.32.9.024.0000 on Advantage Electric Supply

56.32.9.024.0000

Verified stock: 1

Finder 56.32.9.024.0000 is a relay with a connection type of Fast-on 187, designed for a rated current of 12A at 250Vac (AC-1) and 12A at 30Vdc (DC-1), with lower current ratings of 0.5A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a rated voltage for AC operations. The relay supports a communication protocol of C, is designed for use with a control voltage (AC) of 24Vdc, and offers protection functions at 250Vac with a control voltage (AC) withstand of 4 kV. It is rated for an active power of 2 poles, features plug-in residual current sensitivity, and is capable of 100,000 operations for Normally Closed (NC) circuits. The relay's contacts are made from AgNi (Silver Nickel), ensuring durability for up to 50,000,000 operations.

Finder

What can I help you find today?

Recommended parts