PILZ-773810 Pilz Electrical Safety Devices

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Pilz PILZ-773810 is a Safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm and 27mm DIN rails. This unit operates within an ambient air temperature range of -25 to +60°C and features a net height of 94 mm. It is designed specifically for incremental encoders (sin/cos; TTL) and offers various connection types including screw terminals, spring-loaded terminals, and an 8-pin RJ45 female connector. The unit is part of the Safe I/O module sub-range and has an IP20 degree of protection. It supports a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and 4.9-5.1Vdc (5Vdc nominal, module supply via base unit), with a power consumption of 1W from the supply via the base module. The frequency range accommodates 0-3kHz for proximity switches and 0-500kHz for incremental encoders. Constructed from PPO and ABS materials, the unit has a net width of 45 mm and communicates via the RS-422 protocol. It accepts wire cross-sections ranging from 0.25 to 1.5mm2 (24AWG to 16AWG) for various connection types. The unit's depth is 121 mm, and it can be stored in temperatures ranging from -25 to +70°C. Protection functions include galvanic isolation and overload proof (-30 to +30V), with a rated insulation voltage of 30 V. It features 4 digital inputs for proximity switches and 2 digital inputs for incremental encoders, with configurable time delays and an angle phase position range of 60°-120° for differential signals.