PILZ-773815 Pilz Electrical Safety Devices

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Pilz PILZ-773815 is a Safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width rails. It operates within an ambient air temperature range of 0 to +60°C and features a net height of 94 mm. This unit is specifically designed for use with incremental encoders, supporting sin/cos, HTL, and TTL signals. It offers various connection types, including screw terminal connections, spring-loaded terminal connections, and an 8-pin RJ45 female connector for incremental encoders, with stripping lengths of 7mm for screw connections and 9mm for spring-loaded connections. As part of the Safe I/O module sub-range, it has an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The unit supports a frequency input range of 0-200kHz for incremental encoders and offers monitoring frequencies without and with hysteresis. Constructed with a PPO bottom housing and ABS front housing, it measures 45 mm in width and 121 mm in depth. Communication is facilitated through the RS-422 protocol, and it accommodates wire cross-sections ranging from 0.25 to 1.5mm2 / 24AWG to 16AWG for various connection types. Power consumption is minimal at 1 W from the supply via the base module. It is designed for storage in environments with ambient air temperatures ranging from -25 to +70°C. Protection functions include galvanic isolation and overload proofing (-30 to +30V). The rated insulation voltage (Ui) is 30 V. It features 2 digital inputs for incremental encoders (24Vdc; sin/cos; HTL; TTL; RS-422; +12 to +30Vss) and offers configurable time delays for switch-off operations, with specific delays based on frequency inputs and supply interruptions. The angle phase position for the differential signals A; /A and B; /B for incremental encoder input ranges from 60° to 120°.