AES 6112 Schmersal Electronic Components

Product Details

• Short-circuit recognition
  Yes
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Degree of protection of the enclosure
  IP40
• Restistance to shock
  30 g / 11 ms
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Contact resistance, maximum
  0.1 Ω
• Material of the contacts, electrical
  AgCdO
• Integral System Diagnostics, status
  Yes
• Width
  48 mm
• Storage and transport temperature, minimum
  -25 °C
• Frequency range
  50 Hz, 60 Hz
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Electrical power consumption
  2.5 W
• Current, Utilisation category AC-15
  6 A
• Wire breakage detection
  Yes
• Mechanical life, minimum
  50,000,000 Operations
• Height
  96 mm
• Rated impulse withstand voltage Uimp
  4.8 kV
• Rated control voltage at DC, maximum
  27.6 VDC
• Drop-out delay in case of emergency, typically
  20 ms
Conduction resistance, maximum
40 Ω
Stop-Category
0
Number of safety contacts
1
Degree of protection of the mounting space
IP54
Overvoltage category
III
Drop-out delay in case of power failure, typically
80 ms
Current, Utilisation category DC13
6 A
Gross weight
125 g
Number of openers
4
Cable section, maximum
1.5 mm²
Ambient temperature, maximum
+55 °C
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Note (Contact resistance)
in new state
Enclosure material
Glass-fibre, reinforced thermoplastic
Number of LEDs
1
Ambient temperature, minimum
+0 °C
Degree of pollution to VDE 0110
2
Automatic reset function
Yes
Number of shutters
2
Depth
58 mm
Storage and transport temperature, maximum
+70 °C
Rated operating voltage
24 VDC ± 15 %
Operating current
100 mA
Rated AC voltage for controls at DC minimum
20.4 VDC
Reset after disconnection of supply voltage
Yes
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Terminal Connector
Screw connection, rigid or flexible
Degree of protection of clips or terminals
IP20
Thermal test current
5 A
Pull-in delay at automatic start, maximum, typically
100 ms
Voltage, Utilisation category DC13
24 VDC
EMC rating
EN 61000-4-3, EN 61000-4-6, IEC 61000-6-2
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Pull-in delay at RESET, typically
20 ms
Voltage, Utilisation category AC15
230 VAC
Switching capacity, maximum
2 A
Switching capacity, minimum
10 VDC

AES 6112 Related Documents