AZM 161 B ST1-AS RAP Schmersal Safety Switch Interlocks

Product Details

• Degree of pollution to VDE 0100
  3
• AS-i Current consumption, maximum
  100 mA
• Number of actuating directions
  3
• Actuating speed, maximum
  2 m/s
• Degree of protection
  IP67 to EN 60529
• Resistance to vibrations to EN 60068-2-6
  10 Hz ... 150 Hz, amplitude 0.35 mm
• Switching frequency
  1,000 /h
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i, ID-Code
  0xB
• AS-i Outputs, DO 0
  Solenoid control
• Integral System Diagnostics, status
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Height of sensor
  90 mm
• Note (Relative humidity)
  non-condensing, non-icing
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i Specification
  Safety-Slave
• AS-i, ID-Code2
  0xE
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• Operating current
  500 mA
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Actuator monitored
Yes
Length of sensor
30 mm
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Version
V 2.1
Active principle
electromechanical
Clamping force
2,000 N
Storage and transport temperature, maximum
+85 °C
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Outputs, DO 3
No Function
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Manual release
Yes
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Storage and transport temperature, minimum
-25 °C
Protection rating
II
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 2
No Function
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P1
Solenoid interlock locked
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Reaction time, maximum
100 ms
Connector position
Bottom
Width of sensor
130 mm
Relative humidity, minimum
30 %
Power to lock
Yes
Relative humidity, maximum
95 %
Overvoltage category
III
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code1
0xF
AS-i Parameter bits, P0
Actuator detected
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
AS-i Input module address
0
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Actuating play in direction of actuation
5.5 mm
Gross weight
450 g
Latching force
30 N
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Rated insulation voltage Ui
32 VDC
AS-i, IO-Code
0x7

AZM 161 B ST1-AS RAP Related Documents