AZM 161 Z ST1-AS PT Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Length of sensor
  30 mm
• Note (Relative humidity)
  non-condensing, non-icing
• Degree of pollution to VDE 0100
  3
• AS-i Profile
  S-7.B.F.E
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• Operating current
  500 mA
• Integral System Diagnostics, status
  Yes
• Actuating play in direction of actuation
  5.5 mm
• Ambient temperature, minimum
  -25 °C
• Relative humidity, minimum
  30 %
• Switching frequency
  1,000 /h
• AS-i, ID-Code1
  0xF
• AS-i Parameter bits, P0
  Actuator detected
• AS-i Parameter bits, P3
  Error message - locking/unlocking of the solenoid interlock blocked
• Guard locking monitored
  Yes
• Emergency exit
  Yes
• Gross weight
  465 g
• Number of actuating directions
  3
• Connector position
  Bottom
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
AS-i Version
V 2.1
AS-i Outputs, DO 2
No Function
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF)
Power to unlock
Yes
Clamping force
2,000 N
Actuating speed, maximum
2 m/s
Storage and transport temperature, maximum
+85 °C
Width of sensor
130 mm
Relative humidity, maximum
95 %
Restistance to shock
30 g / 11 ms
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code
0xB
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P1
Solenoid interlock locked
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Active principle
electromechanical
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Degree of protection
IP67 to EN 60529
Protection rating
II
AS-i Operating voltage, minimum
26.5 VDC
AS-i Specification
Safety-Slave
AS-i Outputs, DO 1
No Function
AS-i Outputs, DO 3
No Function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Reaction time, maximum
100 ms
Latching force
5 N
Mechanical life, minimum
1,000,000 Operations
Height of sensor
90 mm
Ambient temperature, maximum
+60 °C
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Current consumption, maximum
100 mA
AS-i, IO-Code
0x7
AS-i Outputs, DO 0
Solenoid control
AS-i, ID-Code2
0xE
AS-i Input module address
0
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

AZM 161 Z ST1-AS PT Related Documents