AZM 161 Z ST1-AS RAP Schmersal Safety Switch Interlocks

Product Details

• Integral System Diagnostics, status
  Yes
• Actuating play in direction of actuation
  5.5 mm
• Width of sensor
  130 mm
• Relative humidity, maximum
  95 %
• Degree of pollution to VDE 0100
  3
• AS-i Version
  V 2.1
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Parameter bits, P1
  Solenoid interlock locked
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Reaction time, maximum
  100 ms
• Height of sensor
  90 mm
• Rated insulation voltage Ui
  32 VDC
• AS-i Specification
  Safety-Slave
• AS-i Outputs, DO 0
  Solenoid control
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF)
• Guard locking monitored
  Yes
• Clamping force
  2,000 N
• Storage and transport temperature, minimum
  -25 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Note (AS-i Operating voltage)
  Protection against polarity reversal
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Manual release
Yes
Latching force
30 N
Ambient temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code
0xB
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Active principle
electromechanical
Connector position
Bottom
Relative humidity, minimum
30 %
Overvoltage category
III
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
AS-i Input module address
0
Gross weight
450 g
Actuating speed, maximum
2 m/s
Ambient temperature, maximum
+60 °C
Restistance to shock
30 g / 11 ms
AS-i Operating voltage, minimum
26.5 VDC
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 1
No Function
AS-i Outputs, DO 3
No Function
Number of actuating directions
3
Mechanical life, minimum
1,000,000 Operations
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Power to lock
Yes
Length of sensor
30 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Degree of protection
IP67 to EN 60529
Storage and transport temperature, maximum
+85 °C
Note (Relative humidity)
non-condensing, non-icing
Protection rating
II
Switching frequency
1,000 /h
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code1
0xF
AS-i, ID-Code2
0xE
AS-i Parameter bits, P0
Actuator detected
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Operating current
500 mA

AZM 161 Z ST1-AS RAP Related Documents