AZM 170 B ST-AS RAP Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Height of sensor
  75.5 mm
• Overvoltage category
  III
• AS-i, IO-Code
  0x7
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• Number of actuating directions
  2
• Ambient temperature, minimum
  -25 °C
• Rated insulation voltage Ui
  32 VDC
• AS-i Current consumption, maximum
  100 mA
• AS-i Outputs, DO 0
  Solenoid control
• Operating current
  500 mA
• Gross weight
  310 g
• Mechanical life, minimum
  1,000,000 Operations
• Storage and transport temperature, maximum
  +85 °C
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i Profile
  S-7.B.F.E
• AS-i Outputs, DO 2
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• AS-i, ID-Code1
  0xF
• Power to lock
  Yes
Active principle
electromechanical
Clamping force
1,000 N
Degree of protection
IP67 to EN 60529
Note (Relative humidity)
non-condensing, non-icing
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Version
V 2.1
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Integral System Diagnostics, status
Yes
Width of sensor
90 mm
Relative humidity, maximum
95 %
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code2
0xE
AS-i Outputs, DO 3
No Function
AS-i Input module address
0
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Relative humidity, minimum
30 %
Degree of pollution to VDE 0100
3
AS-i, ID-Code
0xB
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P2
No function
Actuator monitored
Yes
Reaction time, maximum
100 ms
Actuating speed, maximum
2 m/s
Storage and transport temperature, minimum
-25 °C
Protection rating
II
AS-i Specification
Safety-Slave
AS-i Parameter bits, P3
No function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Latching force
30 N
Ambient temperature, maximum
+55 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P1
Solenoid interlock locked
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error

AZM 170 B ST-AS RAP Related Documents