AZM 170 B ST-AS RP Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Relative humidity, minimum
  30 %
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i, ID-Code1
  0xF
• AS-i Parameter bits, P1
  Solenoid interlock locked
• Power to unlock
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Storage and transport temperature, maximum
  +85 °C
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Input module address
  0
• Operating current
  500 mA
• Reaction time, maximum
  100 ms
• Latching force
  30 N
• Ambient temperature, maximum
  +55 °C
• Protection rating
  II
• AS-i Current consumption, maximum
  100 mA
• AS-i Outputs, DO 0
  Solenoid control
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
Integral System Diagnostics, status
Yes
Actuating speed, maximum
2 m/s
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to VDE 0100
3
AS-i, ID-Code
0xB
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Gross weight
285 g
Clamping force
1,000 N
Degree of protection
IP67 to EN 60529
Note (Relative humidity)
non-condensing, non-icing
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code2
0xE
AS-i Parameter bits, P0
Safety guard and actuator detected
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Active principle
electromechanical
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Ambient temperature, minimum
-25 °C
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
AS-i Profile
S-7.B.F.E
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
Actuator monitored
Yes
Width of sensor
90 mm
Rated insulation voltage Ui
32 VDC
AS-i Version
V 2.1
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P3
No function
Number of actuating directions
2
Height of sensor
75.5 mm
Relative humidity, maximum
95 %
AS-i Specification
Safety-Slave
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P2
No function
AS-i Outputs, DO 3
No Function

AZM 170 B ST-AS RP Related Documents