AZM 170 BZ ST-AS P Schmersal Safety Switch Interlocks

Product Details

• Active principle
  electromechanical
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Storage and transport temperature, minimum
  -25 °C
• AS-i Version
  V 2.1
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P2
  No function
• Power to unlock
  Yes
• Actuating speed, maximum
  2 m/s
• Storage and transport temperature, maximum
  +85 °C
• Note (Relative humidity)
  non-condensing, non-icing
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Input module address
  0
• Actuator and interlock combined monitored
  Yes
• Gross weight
  288 g
• Height of sensor
  75.5 mm
• Protection rating
  II
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i, IO-Code
  0x7
• AS-i, ID-Code2
  0xE
AS-i Outputs, DO 0
Solenoid control
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Clamping force
1,000 N
Relative humidity, minimum
30 %
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 3
No Function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Reaction time, maximum
100 ms
Latching force
5 N
Ambient temperature, maximum
+55 °C
Degree of pollution to VDE 0100
3
AS-i Profile
S-7.B.F.E
AS-i Parameter bits, P3
No function
Number of actuating directions
2
Width of sensor
90 mm
Degree of protection
IP67 to EN 60529
Overvoltage category
III
AS-i, ID-Code
0xB
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P0
Safety guard and actuator detected
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Mechanical life, minimum
1,000,000 Operations
Relative humidity, maximum
95 %
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Solenoid interlock locked
Operating current
500 mA
Integral System Diagnostics, status
Yes
Ambient temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Specification
Safety-Slave
AS-i Outputs, DO 2
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

AZM 170 BZ ST-AS P Related Documents