AZM 170 BZ ST-AS RAP Schmersal Safety Switch Interlocks

Product Details

• Active principle
  electromechanical
• Latching force
  30 N
• Ambient temperature, minimum
  -25 °C
• Overvoltage category
  III
• AS-i Version
  V 2.1
• AS-i Outputs, DO 1
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Number of actuating directions
  2
• Ambient temperature, maximum
  +55 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i, IO-Code
  0x7
• AS-i Outputs, DO 2
  No Function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Actuator and interlock combined monitored
  Yes
• Degree of protection
  IP67 to EN 60529
• Note (Relative humidity)
  non-condensing, non-icing
• Degree of pollution to VDE 0100
  3
• AS-i, ID-Code
  0xB
• AS-i Parameter bits, P0
  Safety guard and actuator detected
• Reaction time, maximum
  100 ms
Width of sensor
90 mm
Rated insulation voltage Ui
32 VDC
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 3
No Function
Operating current
500 mA
Power to lock
Yes
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Protection rating
II
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code2
0xE
AS-i Parameter bits, P2
No function
Gross weight
300 g
Clamping force
1,000 N
Storage and transport temperature, maximum
+85 °C
AS-i Operating voltage, minimum
26.5 VDC
AS-i Outputs, DO 0
Solenoid control
AS-i Input module address
0
Integral System Diagnostics, status
Yes
Actuating speed, maximum
2 m/s
Storage and transport temperature, minimum
-25 °C
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Solenoid interlock locked
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Mechanical life, minimum
1,000,000 Operations
Relative humidity, minimum
30 %
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P3
No function
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Height of sensor
75.5 mm
Relative humidity, maximum
95 %
AS-i Specification
Safety-Slave
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error

AZM 170 BZ ST-AS RAP Related Documents