AZM 200 BZ ST-T-AS P Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  Low
• Power to unlock
  Yes
• Height of sensor
  244 mm
• Relative humidity, minimum
  30 %
• Degree of pollution to VDE 0100
  3
• AS-i, IO-Code
  0x7
• AS-i Outputs, DO 3
  No Function
• AS-i Input module address
  0
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Specification
  Safety-Slave
• AS-i Outputs, DO 2
  No Function
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• general information
  Universal coding
• Actuator and interlock combined monitored
  Yes
• Degree of protection
  IP67 to EN 60529
• Restistance to shock
  30 g / 11 ms
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i, ID-Code
  0xB
• AS-i Parameter bits, P0
  Safety guard and actuator detected
AS-i Parameter bits, P1
Solenoid interlock locked
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Clamping force
2,000 N
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Storage and transport temperature, maximum
+85 °C
AS-i, ID-Code1
0xF
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Time to readiness, maximum
4,000 ms
Integral System Diagnostics, status
Yes
Actuating speed, maximum
2 m/s
Ambient temperature, maximum
+60 °C
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code2
0xE
Reaction time, maximum
60 ms
Number of actuating directions
1
Width of sensor
40 mm
Note (Relative humidity)
non-condensing
AS-i Operating voltage, minimum
26.5 VDC
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P3
Error
Gross weight
518 g
Duration of risk, maximum
120 ms
Latching force
30 N
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Active principle
electromechanical
Tightening torque of the screw, maximum
1 Nm
Length of sensor
50 mm
Relative humidity, maximum
95 %
Overvoltage category
III
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 0
Solenoid control
Operating current
500 mA
Standards
IEC 61508, IEC 60947-5-3, EN 60947-5-1
Mechanical life, minimum
1,000,000 Operations
Ambient temperature, minimum
-25 °C
Protection rating
II
AS-i Version
V 2.1
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)

AZM 200 BZ ST-T-AS P Related Documents