AZM400Z-ST-1P2P-T Schmersal Safety Accessories

Product Details

• Gross weight
  846 g
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
• Mechanical life, minimum
  1,000,000 Operations
• Tightening torque of the screw
  8 Nm
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Degree of pollution to VDE 0100
  3
• Reaction time, maximum
  100 ms
• Active principle
  Magnetic field, RFID
• Integral System Diagnostics, status
  Yes
• Lateral force at bolt return, maximal (against locked door)
  300 N
• Storage and transport temperature, minimum
  -40 °C
• Overvoltage category
  III
• Rated operating voltage
  24 VDC
• Switching thresholds of the control inputs
  −3 V … 5 V (Low), 15 V … 30 V (High)
• general information
  Universal coding
• Short-circuit recognition
  Yes
• Number of safety contacts
  2
• Clamping force, maximum Fmax
  13,000 N
• Ambient temperature, minimum
  -20 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
No-load supply current I0
100 mA
Allowable discrepancy time (input), maximum
10 s
Voltage, Utilisation category DC12
24 VDC
Coding level according to ISO 14119
Low
Short circuit detection
Yes
Note (Mechanical lifetime)
Which have a lateral force Ftrans = 100 N: 100.000 operations
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Ambient temperature, maximum
+55 °C
Rated insulation voltage Ui
32 VDC
Enclosure material
Light alloy die-casting
Safety functions
Yes
Clamping force in accordance with ISO14119 Fzh
10,000 N
Height of sensor
166.7 mm
Storage and transport temperature, maximum
+85 °C
Operating Current
100 mA
Switching frequency, approx.
0.3 Hz
Rated operating current (safety outputs)
250 mA
Number of diagnostic signals
1
Terminal Connector
Connector M12, 8-pole
Time to readiness, maximum
1,500 ms
Protection rating
III
Current consumption at 24V, minimum
10 mA
Minimal average cycle time (with continuous operation)
20 s
Current leakage Ir
1.5 mA
Voltage, Utilisation category DC13
24 VDC
Emergency exit
Yes
Interlocking principle
bistable
Width of sensor
77.8 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Current consumption, maximum
600 mA
Required rated short-circuit current to EN 60947-5-1
100 A
Voltage drop Ud, maximum
2 V
Length of sensor
65.3 mm
Restistance to shock
30 g / 11 ms
Guard locking monitored
Yes
Minimum distance devices
30 mm
Current consumption at 24V, maximum
15 mA
Open / close cycle (Motor), minimum
3
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC13
0.05 A
Current, Utilisation category DC12
0.05 A
Operating current
50 mA
Classification ZVEI CB24I, Sink
C1, C2
Versions
short-circuit proof, p-type

AZM400Z-ST-1P2P-T Related Documents