AZM400Z-ST-I1-1P2P Schmersal Safety Accessories

Product Details

• Coding level according to ISO 14119
  High
• Reaction time, maximum
  100 ms
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
• Guard locking monitored
  Yes
• Enclosure material
  Light alloy die-casting
• general information
  Individual coding
• Gross weight
  764 g
• Time to readiness, maximum
  1,500 ms
• Number of safety contacts
  2
• Short circuit detection
  Yes
• Minimal average cycle time (with continuous operation)
  20 s
• Switching thresholds of the control inputs
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Allowable discrepancy time (input), maximum
  10 s
• Switching frequency, approx.
  0.3 Hz
• Rated operating current (safety outputs)
  250 mA
• Rated operating voltage
  24 VDC
• Current leakage Ir
  1.5 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Classification ZVEI CB24I, Source
  C2
• Voltage, Utilisation category DC12
  24 VDC
Voltage drop Ud, maximum
2 V
Current, Utilisation category DC12
0.05 A
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC13
0.05 A
Mechanical life, minimum
1,000,000 Operations
Length of sensor
46.7 mm
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Clamping force in accordance with ISO14119 Fzh
10,000 N
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
No-load supply current I0
100 mA
Interlocking principle
bistable
Short-circuit recognition
Yes
Lateral force at bolt return, maximal (against locked door)
300 N
Degree of pollution to VDE 0100
3
Active principle
Magnetic field, RFID
Minimum distance devices
30 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Current consumption, maximum
600 mA
Versions
short-circuit proof, p-type
Note (Mechanical lifetime)
Which have a lateral force Ftrans = 100 N: 100.000 operations
Ambient temperature, minimum
-20 °C
Overvoltage category
III
Operating current
50 mA
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Width of sensor
77.8 mm
Rated impulse withstand voltage Uimp
0.8 kV
Open / close cycle (Motor), minimum
3
Manual release
Yes
Clamping force, maximum Fmax
13,000 N
Storage and transport temperature, minimum
-40 °C
Operating Current
100 mA
Number of diagnostic signals
1
Terminal Connector
Connector M12, 8-pole
Ambient temperature, maximum
+55 °C
Protection rating
III
Integral System Diagnostics, status
Yes
Storage and transport temperature, maximum
+85 °C
Rated insulation voltage Ui
32 VDC
Current consumption at 24V, minimum
10 mA
Safety functions
Yes
Tightening torque of the screw
8 Nm
Height of sensor
166.7 mm
Current consumption at 24V, maximum
15 mA

AZM400Z-ST-I1-1P2P Related Documents