AZM400Z-ST-I2-1P2P Schmersal Safety Accessories

Product Details

• Current consumption at 24V, maximum
  15 mA
• Coding level according to ISO 14119
  High
• Gross weight
  764 g
• Mechanical life, minimum
  1,000,000 Operations
• Width of sensor
  77.8 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Classification ZVEI CB24I, Source
  C2
• Current, Utilisation category DC13
  0.05 A
• Guard locking monitored
  Yes
• Short-circuit recognition
  Yes
• Note (Mechanical lifetime)
  Which have a lateral force Ftrans = 100 N: 100.000 operations
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Overvoltage category
  III
• Minimal average cycle time (with continuous operation)
  20 s
• Versions
  short-circuit proof, p-type
• Voltage drop Ud, maximum
  2 V
• Reaction time, maximum
  100 ms
• Integral System Diagnostics, status
  Yes
• Tightening torque of the screw
  8 Nm
• Storage and transport temperature, maximum
  +85 °C
Degree of pollution to VDE 0100
3
Operating current
50 mA
Rated operating current (safety outputs)
250 mA
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Manual release
Yes
Clamping force in accordance with ISO14119 Fzh
10,000 N
Terminal Connector
Connector M12, 8-pole
Restistance to shock
30 g / 11 ms
Current consumption, maximum
600 mA
Open / close cycle (Motor), minimum
3
Current, Utilisation category DC12
0.05 A
general information
Individual coding, multiple teaching
Safety functions
Yes
Number of diagnostic signals
1
Ambient temperature, minimum
-20 °C
Current consumption at 24V, minimum
10 mA
Switching frequency, approx.
0.3 Hz
Voltage, Utilisation category DC13
24 VDC
Time to readiness, maximum
1,500 ms
Short circuit detection
Yes
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Height of sensor
166.7 mm
Rated insulation voltage Ui
32 VDC
Rated operating voltage
24 VDC
Allowable discrepancy time (input), maximum
10 s
Voltage, Utilisation category DC12
24 VDC
Active principle
Magnetic field, RFID
Number of safety contacts
2
Clamping force, maximum Fmax
13,000 N
Ambient temperature, maximum
+55 °C
Protection rating
III
Operating Current
100 mA
Switching thresholds of the control inputs
−3 V … 5 V (Low), 15 V … 30 V (High)
Current leakage Ir
1.5 mA
Enclosure material
Light alloy die-casting
Interlocking principle
bistable
Minimum distance devices
30 mm
Lateral force at bolt return, maximal (against locked door)
300 N
Length of sensor
46.7 mm
Storage and transport temperature, minimum
-40 °C
Rated impulse withstand voltage Uimp
0.8 kV
No-load supply current I0
100 mA
Required rated short-circuit current to EN 60947-5-1
100 A
Classification ZVEI CB24I, Sink
C1, C2

AZM400Z-ST-I2-1P2P Related Documents