AZM400Z-ST2-2P2P-BOW-E Schmersal Safety Accessories

Product Details

• Guard locking monitored
  Yes
• Short-circuit recognition
  Yes
• Number of safety contacts
  2
• Clamping force in accordance with ISO14119 Fzh
  10,000 N
• Ambient temperature, maximum
  +55 °C
• Rated insulation voltage Ui
  32 VDC
• No-load supply current I0
  100 mA
• Classification ZVEI CB24I, Source
  C2
• general information
  Universal coding
• Safety functions
  Yes
• Interlocking principle
  bistable
• Height of sensor
  166.7 mm
• Protection rating
  III
• Current consumption at 24V, minimum
  10 mA
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Rated operating current (safety outputs)
  250 mA
• Time to readiness, maximum
  1,500 ms
• Electronic manual release
  Yes
• Coding level according to ISO 14119
  Low
• Integral System Diagnostics, status
  Yes
Active principle
Magnetic field, RFID
Securing holes for Bowden cable assembly
Yes
Clamping force, maximum Fmax
13,000 N
Tightening torque of the screw
8 Nm
Ambient temperature, minimum
-20 °C
Overvoltage category
III
Operating current
50 mA
Current, Utilisation category DC12
0.05 A
Storage and transport temperature, maximum
+85 °C
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Switching thresholds of the control inputs
−3 V … 5 V (Low), 15 V … 30 V (High)
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Reaction time, maximum
100 ms
Mechanical life, minimum
1,000,000 Operations
Terminal Connector
2 connector M12, 8 and 5 pin
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating Current
100 mA
Allowable discrepancy time (input), maximum
10 s
Current, Utilisation category DC13
0.05 A
Enclosure material
Light alloy die-casting
Short circuit detection
Yes
Minimum distance devices
30 mm
Tightening torque of the fixing screws Bowden cable
1.2 Nm
Restistance to shock
30 g / 11 ms
Current consumption at 24V, maximum
15 mA
Open / close cycle (Motor), minimum
3
Current leakage Ir
1.5 mA
Note
The diagnostic output are not safety relevant outputs!
Voltage, Utilisation category DC13
24 VDC
Gross weight
860.1 g
Number of diagnostic signals
2
Lateral force at bolt return, maximal (against locked door)
300 N
Width of sensor
77.8 mm
Rated impulse withstand voltage Uimp
0.8 kV
Rated operating voltage
24 VDC
Minimal average cycle time (with continuous operation)
20 s
Current consumption, maximum
600 mA
Note (Mechanical lifetime)
Which have a lateral force Ftrans = 100 N: 100.000 operations
Storage and transport temperature, minimum
-40 °C
Degree of pollution to VDE 0100
3
Versions
short-circuit proof, p-type
Classification ZVEI CB24I, Sink
C1, C2
Length of sensor
46.7 mm
Switching frequency, approx.
0.3 Hz
Voltage drop Ud, maximum
2 V
Voltage, Utilisation category DC12
24 VDC

AZM400Z-ST2-2P2P-BOW-E Related Documents