FWS 1205 A Schmersal Electronic Components

Product Details

• Stop-Category
  0
• Earth connection detection
  Yes
• Tightening torque of Clips
  0.6 Nm
• Ambient temperature, maximum
  +55 °C
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Voltage, Utilisation category DC13
  24 VDC
• Gross weight
  195 g
• Terminal Connector
  Screw connection, rigid or flexible
• Cable section, maximum
  2.5 mm²
• Degree of protection of clips or terminals
  IP20
• Material of the contacts, electrical
  Ag-Ni 10 and 0.2 µm gold-plated
• Mechanical life, minimum
  20,000,000 Operations
• Cable section, minimum
  0.2 mm²
• Degree of protection of the mounting space
  IP54
• Rated operating voltage
  24 VDC ± 15 %
• Reset after disconnection of supply voltage
  Yes
• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
• Number of undelayed semi-conductor outputs with signaling function
  2
• Depth
  121 mm
Restistance to shock
30 g / 11 ms
Overvoltage category
II
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Switching capacity, minimum
10 mA
EMC rating
10 V/m
Automatic reset function
Yes
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Number of LEDs
1
Terminal designations
IEC/EN 60947-1
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Number of signalling outputs
2
Height
100 mm
Storage and transport temperature, minimum
-25 °C
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Electrical power consumption, maximum
5 W
Storage and transport temperature, maximum
+70 °C
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Current, Utilisation category AC-15
3 A
Input signal, HIGH Signal 1
10 … 30 VDC
Input signal, LOW Signal 0
0 … 2 VDC
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Number of safety contacts
2
Width
22.5 mm
Rated impulse withstand voltage Uimp
4.8 kV
Rated control voltage at DC, maximum
28.8 VDC
Note (Contact resistance)
in new state
Current, Utilisation category DC13
2 A
Voltage, Utilisation category AC15
230 VAC
Contact resistance, maximum
0.1 Ω
Switching capacity, maximum
24 VDC
Wire breakage detection
Yes
Integral System Diagnostics, status
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Degree of protection of the enclosure
IP40
Ambient temperature, minimum
+0 °C
Thermal test current
6 A
Degree of pollution to VDE 0110
3
Conduction resistance, maximum
40 Ω

FWS 1205 A Related Documents