M2S 441-11Y Schmersal Electronic Components

Product Details

• Number of shutters
  1
• Slide form
  Sphere
• Material of the contacts, electrical
  Silver
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Utilisation category AC-15
  250 VAC
• Actuating element
  Plunger
• Terminal Connector
  Screw connection
• Degree of protection
  IP65 to EN 60529
• Bounce duration, maximum
  5 ms
• Cable section, minimum
  1.5 mm²
• Diameter of the Plunger
  10 mm
• Active principle
  mechanical
• Mechanical life, minimum
  5,000,000 Operations
• Width of sensor
  106 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Standards
  EN 60947-5-1
• Actuating angle
  20 °
• Wire cross-section
  13 AWG
• Ambient temperature, minimum
  -30 °C
Switching element
NO contact, NC contact
Note (Switching element)
galvanically separated contact bridges
Enclosure material
Grey cast iron, galvanised
Actuating speed, minimum
1 mm/min
Cable section, maximum
2.5 mm²
Rated insulation voltage Ui
250 V
Switchover time, maximum
35 ms
Enclosure coating material
painted
Number of openers
1
Gross weight
1,310 g
Contact opening
2 x 2.5 mm
Actuating speed, maximum
1 m/s
Length of sensor
63 mm
Height of sensor
161 mm
Ambient temperature, maximum
+90 °C
Thermal test current
16 A
Switching principle
Snap switch element

M2S 441-11Y Related Documents