MV10H 330-11Y-M20-1348 Schmersal Electronic Components

Product Details

• Active principle
  mechanical
• Number of shutters
  1
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Enclosure coating material
  painted
• Enclosure material
  Light-alloy diecast, paint finish
• Cable section, maximum
  2.5 mm²
• Diameter of the Rod
  6 mm
• Switching principle
  Snap switch element
• Repeat accuracy of switching points
  0.02
• Actuating element
  Rod lever
• Length of sensor
  40 mm
• Rated insulation voltage Ui
  250 V
• Number of openers
  1
• Terminal Connector
  Screw connection
• Degree of protection
  IP65 to EN 60529
• Switching element
  NO contact, NC contact
• Gross weight
  380 g
• Actuating torque
  0.5 Nm
• Width of sensor
  40 mm
• Ambient temperature, maximum
  +90 °C
Standards
EN 60947-5-1
Mechanical life, minimum
30,000,000 Operations
Material of the rod
Epoxy resin
Cable section, minimum
1.5 mm²
Restistance to shock
50 g / 6 ms
Material of the contacts, electrical
Silver
Actuating speed, minimum
1 mm/min
Bounce duration, maximum
43,221 ms
Contact opening
2 x 0.5 mm
Thermal test current
6 A
Utilisation category AC-15
230 VAC
Height of sensor
276 mm
Note (Switching element)
galvanically separated contact bridges
Wire cross-section
13 AWG
Rated impulse withstand voltage Uimp
4 kV
Ambient temperature, minimum
-30 °C
Switchover time, maximum
10 ms

MV10H 330-11Y-M20-1348 Related Documents