MZM 100 ST-AS AP Schmersal Electronic Components

Product Details

• Active principle
  inductive
• Clamping force, guaranteed
  500 N
• Degree of protection
  IP67 to EN 60529
• Note (Relative humidity)
  non-condensing, non-icing
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i, ID-Code
  0xB
• AS-i Outputs, DO 2
  No Function
• AS-i Parameter bits, P2
  Auxiliary voltage in
• Reaction time, maximum
  150 ms
• Mechanical life, minimum
  1,000,000 Operations
• Integral System Diagnostics, status
  Yes
• Height of sensor
  179 mm
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Version
  V 2.1
• AS-i Outputs, DO 3
  No Function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Gross weight
  600 g
• Power to lock
  Yes
• Clamping force, typically
  750 N
• Ambient temperature, minimum
  -25 °C
Overvoltage category
III
AS-i Specification
Safety-Slave
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Coding level according to ISO 14119
Low
Width of sensor
40 mm
Relative humidity, minimum
30 %
Degree of pollution to IEC/EN 60664-1
3
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 0
Solenoid control
AS-i Input module address
0
Time to readiness, maximum
4,000 ms
Standards
EN 62026-2, EN 60947-5-3, EN ISO 13849-1
Length of sensor
40 mm
Storage and transport temperature, maximum
+85 °C
Protection rating
III
AS-i Current consumption, maximum
100 mA
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P3
Device error (fault detected)
general information
Universal coding
Note (Mechanical lifetime)
Actuating speed < 0.5 m/s, Operations for door weights ≤ 5 kg
Safety functions
Yes
Ambient temperature, maximum
+55 °C
Restistance to shock
30 g / 11 ms
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P1
Solenoid interlock locked
Enclosure material
Glass-fibre, reinforced thermoplastic
Guard locking monitored
Yes
Relative humidity, maximum
95 %
Rated insulation voltage Ui
32 VDC
AS-i, IO-Code
0x7
AS-i, ID-Code1
0xF
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Duration of risk, maximum
150 ms
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Storage and transport temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code2
0xE
AS-i Parameter bits, P0
Actuator in
Operating current
600 mA

MZM 100 ST-AS AP Related Documents