MZM 100 ST-AS REAP Schmersal Electronic Components

Product Details

• Gross weight
  602 g
• Latching force, maximum
  100 N
• Ambient temperature, maximum
  +55 °C
• Relative humidity, minimum
  30 %
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i, ID-Code2
  0xE
• AS-i Parameter bits, P2
  Auxiliary voltage in
• AS-i Operating voltage, minimum
  26.5 VDC
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P3
  Device error (fault detected)
• Reaction time, maximum
  150 ms
• Coding level according to ISO 14119
  Low
• Integral System Diagnostics, status
  Yes
• Clamping force, typically
  750 N
• Ambient temperature, minimum
  -25 °C
• Note (Relative humidity)
  non-condensing, non-icing
• Degree of pollution to IEC/EN 60664-1
  3
• AS-i, ID-Code1
  0xF
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Input module address
0
Duration of risk, maximum
150 ms
Safety functions
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Length of sensor
40 mm
Storage and transport temperature, maximum
+85 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
AS-i, IO-Code
0x7
AS-i Parameter bits, P0
Actuator in
Active principle
inductive
Latching
Yes
Standards
EN 62026-2, EN 60947-5-3, EN ISO 13849-1
Height of sensor
179 mm
Relative humidity, maximum
95 %
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Profile
S-7.B.F.E
AS-i Parameter bits, P1
Solenoid interlock locked
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Time to readiness, maximum
4,000 ms
Latching force, minimum
30 N
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
AS-i, ID-Code
0xB
AS-i Outputs, DO 0
Solenoid control
Power to lock
Yes
Note (Mechanical lifetime)
Actuating speed < 0.5 m/s, Operations for door weights ≤ 5 kg
Width of sensor
40 mm
Protection rating
III
AS-i Current consumption, maximum
100 mA
AS-i Outputs, DO 3
For the variable setting of the latching force
Operating current
600 mA
general information
Universal coding
Clamping force, guaranteed
500 N
Degree of protection
IP67 to EN 60529
Overvoltage category
III
AS-i Version
V 2.1
AS-i Outputs, DO 2
For the variable setting of the latching force
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Guard locking monitored
Yes
Mechanical life, minimum
1,000,000 Operations
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Restistance to shock
30 g / 11 ms
AS-i Specification
Safety-Slave
AS-i Outputs, DO 1
For the variable setting of the latching force
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error

MZM 100 ST-AS REAP Related Documents