SLC440AS-ER-0890-14 Schmersal Safety Light Curtains

Product Details

• AS-i Parameter bits, P2
  No function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Gross weight
  1,630 g
• Height of the protection field
  890 mm
• Height of transmitter
  1,003 mm
• Ambient temperature, maximum
  +50 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Profile
  S-0.B.F.E
• AS-i Parameter bits, P3
  Internal device error (FID)
• Power consumption, Transmitter
  75 mA
• Standards
  EN 50295, EN 62061, EN 61496-1
• 7-segment display
  Yes
• Terminal Connector
  Connector
• Ambient temperature, minimum
  -10 °C
• Rated insulation voltage Ui
  32 VDC
• AS-i Version
  V 3.0
• Number of beams
  88
• Terminal connector, Recipient
  Connector plug M12, 5-pole
Width of sensor
27.8 mm
Active principle
optoelectronic
Reaction time, maximum
23 ms
Hide function
Yes
Detection ability for test bodies at v = 1.6 m/s
14 mm
Range, protection field, minimum
300 mm
Wave length of the sensor
880 nm
Height of Receiver
1,023 mm
Length of sensor
33 mm
Storage and transport temperature, maximum
+70 °C
Safety functions
Yes
Range, protection field, maximum
7,000 mm
Degree of protection
IP67 to EN 60529
Protection rating
III
AS-i Current consumption, maximum
50 mA
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
AS-i Operating voltage, minimum
18 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Enclosure material
Aluminium
Integral System Diagnostics, status
Yes
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Storage and transport temperature, minimum
-25 °C
Restistance to shock
10 g / 16 ms
Degree of pollution to VDE 0100
2
AS-i Specification
Safety-Slave
Overvoltage category
III
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Parameter bits, P1
Low beam quality
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P0
No function
Power consumption, Receiver
150 mA
AS-i Outputs, DO 0 … DO 3
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

SLC440AS-ER-0890-14 Related Documents