SLC440AS-ER-1610-30 Schmersal Safety Light Curtains

Product Details

• Enclosure material
  Aluminium
• Wave length of the sensor
  880 nm
• Ambient temperature, maximum
  +50 °C
• Width of sensor
  27.8 mm
• Degree of pollution to VDE 0100
  2
• AS-i Version
  V 3.0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• 7-segment display
  Yes
• Reaction time, maximum
  23 ms
• Number of beams
  80
• Detection ability for test bodies at v = 1.6 m/s
  30 mm
• Height of the protection field
  1,610 mm
• Ambient temperature, minimum
  -10 °C
• Height of Receiver
  1,743 mm
• Overvoltage category
  III
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Profile
  S-0.B.F.E
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Input module address
  0
Power consumption, Transmitter
75 mA
Gross weight
2,730 g
Active principle
optoelectronic
Standards
EN 50295, EN 62061, EN 61496-1
Terminal connector, Recipient
Connector plug M12, 5-pole
Terminal Connector
Connector
Height of transmitter
1,723 mm
Length of sensor
33 mm
Protection rating
III
Restistance to shock
10 g / 16 ms
Note (AS-i Operating voltage)
Protection against polarity reversal
Integral System Diagnostics, status
Yes
Hide function
Yes
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Degree of protection
IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
AS-i Outputs, DO 0 … DO 3
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Safety functions
Yes
Range, protection field, minimum
300 mm
Range, protection field, maximum
10,000 mm
Storage and transport temperature, maximum
+70 °C
Storage and transport temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
AS-i Operating voltage, minimum
18 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
No function
AS-i Parameter bits, P2
No function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
AS-i Current consumption, maximum
50 mA
AS-i Parameter bits, P3
Internal device error (FID)
AS-i Parameter bits, P1
Low beam quality
Power consumption, Receiver
150 mA

SLC440AS-ER-1610-30 Related Documents