SLG440AS-ER-0500-02 Schmersal Safety Light Curtains

Product Details

• Beam distance
  500 mm
• 7-segment display
  Yes
• Height of the Sensor (Transmitter)
  643 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• Power consumption, Receiver
  150 mA
• Standards
  EN 50295, EN 62061, EN 61496-1
• Integral System Diagnostics, status
  Yes
• Wave length of the sensor
  880 nm
• Width of sensor
  27.8 mm
• Protection rating
  III
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Outputs, DO 0 … DO 3
  No Function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Safety functions
  Yes
• Detection ability for test bodies at v = 1.6 m/s
  500 mm
• Terminal Connector
  Connector
• Degree of protection
  IP67 to EN 60529
• Restistance to shock
  10 g / 16 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Profile
S-0.B.F.E
Power consumption, Transmitter
75 mA
Enclosure material
Aluminium
Range, protection field, maximum
12,000 mm
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Ambient temperature, maximum
+50 °C
Rated insulation voltage Ui
32 VDC
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
No function
AS-i Input module address
0
Gross weight
1,030 g
Range, protection field, minimum
300 mm
Height of Receiver
663 mm
Storage and transport temperature, maximum
+70 °C
Overvoltage category
III
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
optoelectronic
Hide function
Yes
Length of sensor
33 mm
Storage and transport temperature, minimum
-25 °C
Degree of pollution to VDE 0100
2
AS-i Version
V 3.0
AS-i Parameter bits, P2
No function
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Reaction time, maximum
18 ms
Number of beams
2
Terminal connector, Recipient
Connector plug M12, 5-pole
Ambient temperature, minimum
-10 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Current consumption, maximum
50 mA
AS-i Parameter bits, P1
Low beam quality
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

SLG440AS-ER-0500-02 Related Documents