SLG440AS-ER-0800-03 Schmersal Safety Light Curtains

Product Details

• Beam distance
  400 mm
• Terminal connector, Recipient
  Connector plug M12, 5-pole
• Storage and transport temperature, minimum
  -25 °C
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Terminal, Connector, Transmitter
  Connector plug M12, 4-pole
• Ambient temperature, minimum
  -10 °C
• Protection rating
  III
• AS-i Current consumption, maximum
  50 mA
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Degree of pollution to VDE 0100
  2
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Input module address
  0
• AS-i Operating voltage AS-i maximum
  31.6 VDC
• AS-i Outputs, DO 0 … DO 3
  No Function
• Power consumption, Transmitter
  75 mA
• Enclosure material
  Aluminium
• Active principle
  optoelectronic
• Range, protection field, maximum
  12,000 mm
Width of sensor
27.8 mm
Rated impulse withstand voltage Uimp
0.8 kV
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P2
No function
Reaction time, maximum
18 ms
Detection ability for test bodies at v = 1.6 m/s
400 mm
Height of Receiver
963 mm
Ambient temperature, maximum
+50 °C
Rated insulation voltage Ui
32 VDC
AS-i Profile
S-0.B.F.E
AS-i Parameter bits, P0
No function
Power consumption, Receiver
150 mA
7-segment display
Yes
Hide function
Yes
Range, protection field, minimum
300 mm
Number of beams
3
Wave length of the sensor
880 nm
Length of sensor
33 mm
Storage and transport temperature, maximum
+70 °C
AS-i Operating voltage, minimum
18 VDC
Overvoltage category
III
AS-i Version
V 3.0
AS-i Specification
Safety-Slave
AS-i Parameter bits, P1
Low beam quality
AS-i Parameter bits, P3
Internal device error (FID)
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Standards
EN 50295, EN 62061, EN 61496-1
Terminal Connector
Connector
Height of the Sensor (Transmitter)
943 mm
Safety functions
Yes
Integral System Diagnostics, status
Yes
Degree of protection
IP67 to EN 60529
Restistance to shock
10 g / 16 ms
Gross weight
1,480 g

SLG440AS-ER-0800-03 Related Documents