SLG440AS-ER-0900-04 Schmersal Safety Light Curtains

Product Details

• Standards
  EN 50295, EN 62061, EN 61496-1
• Range, protection field, minimum
  300 mm
• Ambient temperature, maximum
  +50 °C
• Overvoltage category
  III
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Enclosure material
  Aluminium
• Range, protection field, maximum
  12,000 mm
• Storage and transport temperature, maximum
  +70 °C
• Degree of pollution to VDE 0100
  2
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Input module address
  0
• Power consumption, Transmitter
  75 mA
• Safety functions
  Yes
• Detection ability for test bodies at v = 1.6 m/s
  300 mm
• Ambient temperature, minimum
  -10 °C
• Length of sensor
  33 mm
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Version
  V 3.0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Beam distance
300 mm
Gross weight
1,630 g
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Reaction time, maximum
18 ms
Number of beams
4
Storage and transport temperature, minimum
-25 °C
Restistance to shock
10 g / 16 ms
AS-i Profile
S-0.B.F.E
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Hide function
Yes
Wave length of the sensor
880 nm
Height of transmitter
1,043 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Outputs, DO 0 … DO 3
No Function
AS-i Parameter bits, P2
No function
7-segment display
Yes
Terminal connector, Recipient
Connector plug M12, 5-pole
Width of sensor
27.8 mm
Protection rating
III
AS-i Specification
Safety-Slave
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
optoelectronic
Integral System Diagnostics, status
Yes
Terminal Connector
Connector
Height of Receiver
1,063 mm
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Current consumption, maximum
50 mA
AS-i Parameter bits, P1
Low beam quality
Degree of protection
IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P0
No function
Power consumption, Receiver
150 mA

SLG440AS-ER-0900-04 Related Documents