Advantage Electric Supply Logo

509FXE-A-ST-15 Red Lion Industrial Automation Components

509FXE-A-ST-15 on Advantage Electric Supply
Red Lion

Part#:509FXE-A-ST-15

Manufacturer:Red Lion

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Red Lion 509FXE-A-ST-15 is an Ethernet switch designed for industrial process control with monitored Ethernet switch capabilities. It features IGMP Auto Configuration, VLAN, QoS, Trunking or Link aggregation, Port Mirroring, and N-View Remote Monitoring Technology. This model operates on a supply voltage of 10-30Vdc, including redundant power inputs, and offers connectivity through 8 RJ45 ports (10/100BaseTX) and 1 Fiber optic ST connector (single-mode) with a 15km rated optical fiber length for 100BaseFX. It includes advanced management firmware, supports an ambient air temperature for storage of -40 to +85 degrees Celsius, and achieves a maximum throughput of 2.6Gbit/s. The component utilizes DIN rail technology, is encased in a metallic case, and is specified as a 9-port device within the N-Tron 500-A series, adhering to the UNSPSC code.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Red Lion Industrial Automation Components

508TX-A on Advantage Electric Supply

508TX-A

Red Lion

Red Lion 508TX-A is an Ethernet Switch designed for industrial process control with features including IGMP Auto Configuration, VLAN, QoS, Trunking or Link aggregation, Port Mirroring, and N-View Remote Monitoring Technology. It operates with a supply voltage of 10-30Vdc, including redundant power inputs, and does not specify an AC supply voltage range. This model offers 8 RJ45 ports supporting 10/100BaseTX for connectivity and boasts a maximum throughput of 2.6Gbit/s. It uses Ethernet as its communication protocol and is designed for DIN rail mounting. The 508TX-A, part of the N-Tron 500-A series, is encased in a metallic housing and can operate within an ambient air temperature range of -40 to +85 degrees Celsius.

1 in stock
2ZR6AA-10 on Advantage Electric Supply

2ZR6AA-10

Red Lion

Red Lion 2ZR6AA-10 is a duplex fiber optic cable designed for multi-mode network applications. It features ST connectors on both ends, ensuring compatibility with a wide range of fiber optic equipment. The cable is 10 feet (3.05 meters) in length and is constructed with a 62.5/125 micron diameter, suitable for 1310nm wavelength networks. Its design focuses on connecting devices within a multi-mode fiber optic network using ST-ST connectors.

1 in stock
106FX2-ST on Advantage Electric Supply

106FX2-ST

Red Lion

Red Lion 106FX2-ST is an industrial Ethernet switch designed for automation networks. It operates with a supply voltage range of 10-30Vdc, including redundant power inputs to enhance system reliability. This model features 4 RJ45 ports supporting 10/100BaseTX and 2 fiber optic ST connectors for multi-mode fiber with a 2km rated optical fiber length, ensuring broad compatibility and network extension capabilities. The switch is designed for a storage ambient air temperature range of -40 to +70 degrees Celsius and achieves a maximum throughput of 1.2Gbit/s, suitable for high-speed data transmission requirements. Its rated voltage is classified as IP30, indicating a degree of protection against solid objects. The 106FX2-ST utilizes DIN rail mounting technology for easy installation and comes in a metallic case, providing durability in industrial environments. It is part of the N-Tron 100 series, identified by the UNSPSC code as a 6-port Ethernet switch.

12 in stock
7018TX on Advantage Electric Supply

7018TX

Red Lion

Red Lion 7018TX is an industrial managed Gigabit Ethernet switch designed for robust and high-speed network performance. It features SNMP v1, v2, and Web Browser Management for comprehensive control and monitoring. The switch is equipped with N-Ring Technology ensuring a 30ms healing time for network recovery, alongside N-Link Redundant Ring and N-View Monitoring Technologies for enhanced network reliability and visibility. It supports EtherNet/IP CIP Messaging, IGMP Auto Configuration, 802.1Q tag VLAN, Port VLAN, 802.1p QoS, Port QoS, Port Trunking, and Port Mirroring for versatile network management. The 7018TX also includes 802.1d, 802.1w, and 802.1D RSTP for network resilience, a DHCP Server with Option 82 Relay, and IP Fallback for network flexibility. It offers Local Port IP Addressing, 802.1AB-2005 LLDP for device discovery, and MAC Address Based Filtering for port security. The switch has 16 RJ45 ports (10/100BaseTX) and 2 optional SFP (Mini-GBIC) Gigabit Transceivers slots, supporting a supply voltage of 10-30Vdc (12Vdc / 24Vdc) and operates within a temperature range of -40 to +70°C. It utilizes ESD and Surge protection on power inputs, is housed in a metallic case for durability, and is designed for DIN rail mounting, making it part of the N-Tron 7000 series.

1 in stock
7014FX2-ST on Advantage Electric Supply

7014FX2-ST

Red Lion

N-TRON® 7014FX2 Gigabit Capable Industrial Ethernet Switch

1 in stock

Manufacturer warranty

509FXE-A-ST-15 Red Lion

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

with money back guarantee

Warranty On All Parts

Manufacturer warranty

Responsive Customer Support

Let us know how we can help!

Need more details?

Feel free to chat with us

About the manufacturer

Red Lion

Advantage Electric Supply is an authorized Red Lion distributor, proudly offering their wide range of innovative industrial automation and networking products. As a leading manufacturer in the industry, Red Lion specializes in delivering reliable solutions that enhance connectivity, monitoring, and control within industrial environments. Their extensive product line includes Human Machine Interfac...

Recently viewed products

QS10.121 on Advantage Electric Supply

QS10.121

Puls

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

0 in stock

Relevant products

509FXE-A-ST-40 on Advantage Electric Supply

509FXE-A-ST-40

Verified stock: 0

Red Lion 509FXE-A-ST-40 is an Ethernet Switch designed for industrial process control with monitored Ethernet switch capabilities. It features IGMP Auto Configuration, VLAN, QoS, Trunking or Link aggregation, Port Mirroring, and N-View Remote Monitoring Technology. The switch operates on a supply voltage of 10-30Vdc, including redundant power inputs, and offers connectivity through 8 RJ45 ports (10/100BaseTX) and 1 Fiber optic ST connector (single-mode) with a 100BaseFX rated current and a 40km rated optical fiber length. It incorporates advanced management firmware, supports an ambient air temperature for storage of -40 to +85 degrees Celsius, and achieves a maximum throughput of 2.6Gbit/s. The component utilizes DIN rail technology, has a metallic case, and is specified as a 9-ports device within the N-Tron 500-A series, with a UNSPSC code corresponding to its series.

Red Lion

509FXE-N-SC-40 on Advantage Electric Supply

509FXE-N-SC-40

Verified stock: 0

Red Lion 509FXE-N-SC-40 is an Ethernet switch designed for industrial process control with monitored Ethernet switch capabilities. It features N-View Remote Monitoring Technology and supports a supply voltage range of 10-30Vdc, including redundant power inputs of 12Vdc and 24Vdc. This model includes 8 RJ45 ports supporting 10/100BaseTX and 1 fiber optic SC connector for single-mode fiber with a 40km rated optical length, suitable for applications requiring long-distance communication. The switch operates efficiently with a maximum throughput of 2.6Gbit/s and is designed for use in environments with ambient air temperatures ranging from -40 to +85 degrees Celsius. Its construction includes a metallic case for durability and is mounted using DIN rail technology. The 509FXE-N-SC-40, part of the N-Tron 500-N series, is specified as a 9-port Ethernet switch and is categorized under the UNSPSC code for Ethernet switches.

Red Lion

509FXE-N-ST-80 on Advantage Electric Supply

509FXE-N-ST-80

Verified stock: 0

Red Lion 509FXE-N-ST-80 is an Ethernet switch designed for industrial process control with monitored Ethernet switch capabilities. It features N-View Remote Monitoring Technology and supports a supply voltage of 10-30Vdc, including redundant power inputs of 12Vdc and 24Vdc. This model includes 8 RJ45 ports supporting 10/100BaseTX and 1 fiber optic ST connector for single-mode with a 60km rated optical fiber length. The ambient air temperature for storage is specified from -40 to +85 degrees Celsius. It offers a maximum throughput of 2.6Gbit/s, operates with Ethernet rated impulse voltage (Uimp), and utilizes DIN rail technology for component installation. The switch is encased in a metallic body and is part of the N-Tron 500-N series, featuring 9 ports in total.

Red Lion

509FXE-SC-80 on Advantage Electric Supply

509FXE-SC-80

Verified stock: 0

Red Lion 509FXE-SC-80 is an industrial Ethernet switch designed for robust networking applications. It operates on a supply voltage of 10-30Vdc, including redundant power inputs of 12Vdc and 24Vdc, ensuring continuous operation. This model features 8 RJ45 ports supporting 10/100BaseTX and 1 fiber optic SC connector for single-mode fiber with a length rating of 80km, suitable for long-distance communication. The switch is capable of a maximum throughput of 2.6Gbit/s, accommodating high-speed data transfer. It is housed in a metallic case, adhering to an IP20 rating for protection against solid objects, and is designed for DIN rail mounting, facilitating easy installation in industrial environments. The ambient air temperature for storage ranges from -40 to +85 degrees Celsius, ensuring durability under various conditions. This product is part of the N-Tron 500 series, classified under the UNSPSC code specific to Ethernet switches.

Red Lion

509FX-SC on Advantage Electric Supply

509FX-SC

Verified stock: 0

Red Lion 509FX-SC is an industrial Ethernet switch designed for automation networks. It operates with a supply voltage range of 10-30Vdc, including redundant power inputs to enhance system reliability. This switch features 8 RJ45 ports supporting 10/100BaseTX and 1 fiber optic SC connector for multi-mode fiber with a 2km rated optical fiber length. It is designed to withstand ambient air temperatures for storage ranging from -40 to +85 degrees Celsius. With a maximum throughput of 2.6Gbit/s, it ensures rapid data transmission across the network. The 509FX-SC is housed in a metallic case, suitable for DIN rail mounting, and conforms to an IP20 rating for protection against objects larger than 12.5mm but not against water. It is part of the N-Tron 500 series and is identified with the UNSPSC code specific to this product line.

Red Lion

FAQ

Out if stock but available for backorder.

We're dedicated to getting your orders to you as fast as possible and offer different shipping options to make sure you get what you need on time.

We're fully committed to delivering quality you can trust. If something isn't quite right, you have 30 days to return it. And should a part be defective, our 1-year warranty ensures you're covered.

Red Lion 509FXE-A-ST-15 is an Ethernet switch designed for industrial process control with monitored Ethernet switch capabilities. It features IGMP Auto Configuration, VLAN, QoS, Trunking or Link aggregation, Port Mirroring, and N-View Remote Monitoring Technology. This model operates on a supply voltage of 10-30Vdc, including redundant power inputs, and offers connectivity through 8 RJ45 ports (10/100BaseTX) and 1 Fiber optic ST connector (single-mode) with a 15km rated optical fiber length for 100BaseFX. It includes advanced management firmware, supports an ambient air temperature for storage of -40 to +85 degrees Celsius, and achieves a maximum throughput of 2.6Gbit/s. The component utilizes DIN rail technology, is encased in a metallic case, and is specified as a 9-port device within the N-Tron 500-A series, adhering to the UNSPSC code.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts