AES 1102.4 42 VAC Schmersal Electronic Components

Product Details

• Wire breakage detection
  Yes
• Reset after disconnection of supply voltage
  Yes
• Automatic reset function
  Yes
• Number of LEDs
  1
• Depth
  110 mm
• Note (Contact resistance)
  in new state
• Voltage, Utilisation category AC15
  250 VAC
• EMC rating
  EMC-Directive
• Gross weight
  160 g
• Number of safety contacts
  1
• Width
  22.5 mm
• Ambient temperature, minimum
  +0 °C
• Frequency range
  50 Hz, 60 Hz
• Rated AC voltage for controls, 60 Hz, minimum
  35.7 VAC
• Pull-in delay at RESET, typically
  20 ms
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Stop-Category
  0
• Terminal Connector
  Screw connection, rigid or flexible
• Degree of protection of the enclosure
  IP40
• Rated impulse withstand voltage Uimp
  4 kV
Material of the contacts, electrical
AgCdO
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Mounting
Snaps onto standard DIN rail to EN 60715
Height
75 mm
Storage and transport temperature, maximum
+70 °C
Degree of pollution to IEC/EN 60664-1
2
Contact resistance, maximum
0.1 Ω
Current, Utilisation category AC-15
1.5 A
Number of openers
4
Tightening torque of Clips
0.6 Nm
Degree of protection of clips or terminals
IP20
Overvoltage category
III
Thermal test current
4 A
Drop-out delay in case of emergency, typically
20 ms
Current, Utilisation category DC13
1 A
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Integral System Diagnostics, status
Yes
Terminal designations
IEC/EN 60947-1
Degree of protection of the mounting space
IP54
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated operating voltage
42 V
Number of shutters
2
Cable section, maximum
2.5 mm²
Ambient temperature, maximum
+55 °C
Restistance to shock
30 g / 11 ms
Electrical power consumption
2.4 W
Drop-out delay in case of power failure, typically
80 ms
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Mechanical life, minimum
3,000,000 Operations
Storage and transport temperature, minimum
-25 °C
Rated AC voltage for controls, 50 Hz, minimum
35.7 VAC
Switching capacity, maximum
24 VDC
Voltage, Utilisation category DC13
24 VDC
Rated control voltage at AC 60 Hz, maximum
46.2 VAC
Current, Utilisation category DC12
0.1 A
Conduction resistance, maximum
40 Ω
Switching capacity, minimum
10 mA
Rated control voltage at AC 50 Hz, maximum
46.2 VAC
Voltage, Utilisation category DC12
24 VDC

AES 1102.4 42 VAC Related Documents