AES 1112.3 24 VAC Schmersal Electronic Components

Product Details

• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
• Automatic reset function
  Yes
• Wire breakage detection
  Yes
• Reset after disconnection of supply voltage
  Yes
• Degree of pollution to IEC/EN 60664-1
  2
• Number of LEDs
  1
• Depth
  110 mm
• Stop-Category
  0
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Width
  22.5 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Voltage, Utilisation category DC12
  24 VDC
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Terminal designations
  IEC/EN 60947-1
• Degree of protection of clips or terminals
  IP20
• Restistance to shock
  30 g / 11 ms
• Rated operating voltage
  24 VAC
• Switching capacity, minimum
  10 mA
Conduction resistance, maximum
40 Ω
Material of the contacts, electrical
AgCdO
Mechanical life, minimum
10,000,000 Operations
Tightening torque of Clips
0.6 Nm
Frequency range
50 Hz, 60 Hz
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Current, Utilisation category AC-15
3 A
Number of openers
2
Ambient temperature, maximum
+55 °C
Storage and transport temperature, maximum
+70 °C
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Voltage, Utilisation category DC13
24 VDC
Switching capacity, maximum
2 A
Integral System Diagnostics, status
Yes
Number of shutters
1
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Contact resistance, maximum
0.1 Ω
Voltage, Utilisation category AC15
230 VAC
Cable section, maximum
2.5 mm²
Height
75 mm
Note (Contact resistance)
in new state
Pull-in delay at RESET, typically
20 ms
EMC rating
EMC-Directive
Gross weight
120 g
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Number of safety contacts
1
Ambient temperature, minimum
+0 °C
Electrical power consumption
2.4 W
Terminal Connector
Screw connection, rigid or flexible
Degree of protection of the enclosure
IP40
Thermal test current
4 A
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Current, Utilisation category DC13
2 A
Current, Utilisation category DC12
0.1 A
Degree of protection of the mounting space
IP54
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
Drop-out delay in case of power failure, typically
80 ms
Drop-out delay in case of emergency, typically
20 ms

AES 1112.3 24 VAC Related Documents