AES 1136 Schmersal Electronic Components

Product Details

• Short-circuit recognition
  Yes
• Number of openers
  2
• Number of signalling outputs
  2
• Degree of protection of the mounting space
  IP54
• Overvoltage category
  III
• Rated control voltage at AC 60 Hz, maximum
  26.4 VAC
• Contact resistance, maximum
  0.1 Ω
• Current, Utilisation category AC-15
  6 A
• Current, Utilisation category DC12
  0.1 A
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Start-up test
  Yes
• Height
  100 mm
• Ambient temperature, minimum
  +0 °C
• Degree of pollution to IEC/EN 60664-1
  2
• Rated control voltage at DC, maximum
  28.8 VDC
• Automatic reset function
  Yes
• Number of LEDs
  1
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Depth
  121 mm
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
Frequency range
50 Hz, 60 Hz
Electrical power consumption
5 W
Current, Utilisation category DC13
6 A
Voltage, Utilisation category DC12
24 VDC
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Number of undelayed semi-conductor outputs with signaling function
2
Tightening torque of Clips
0.6 Nm
Storage and transport temperature, minimum
-25 °C
Wire breakage detection
Yes
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Stop-Category
0
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Integral System Diagnostics, status
Yes
Terminal designations
IEC/EN 60947-1
Cable section, maximum
2.5 mm²
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Drop-out delay in case of power failure, typically
80 ms
Voltage, Utilisation category AC15
230 VAC
Width
22.5 mm
Storage and transport temperature, maximum
+70 °C
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Switching capacity, minimum
10 VDC
Earth connection detection
Yes
Mechanical life, minimum
20,000,000 Operations
Rated AC voltage for controls at DC minimum
20.4 VDC
Pull-in delay at automatic start, maximum, typically
100 ms
Gross weight
155 g
Degree of protection of the enclosure
IP40
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Voltage, Utilisation category DC13
24 VDC
EMC rating
EMC-Directive
Number of safety contacts
1
Ambient temperature, maximum
+55 °C
Thermal test current
6 A
Terminal Connector
Screw connection, rigid or flexible
Degree of protection of clips or terminals
IP20
Restistance to shock
30 g / 11 ms
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Note (Contact resistance)
in new state
Pull-in delay at RESET, typically
20 ms
Input signal, LOW Signal 0
0 … 2 VDC
Number of shutters
1
Cable section, minimum
0.25 mm²
Rated impulse withstand voltage Uimp
4 kV
Drop-out delay in case of emergency, typically
20 ms
Input signal, HIGH Signal 1
10 … 30 VDC
Switching capacity, maximum
2 A
Conduction resistance, maximum
40 Ω

AES 1136 Related Documents