AZM 161 B ST1-AS R Schmersal Safety Switch Interlocks

Product Details

• Gross weight
  491 g
• Number of actuating directions
  3
• Storage and transport temperature, minimum
  -25 °C
• Relative humidity, maximum
  95 %
• Overvoltage category
  III
• AS-i, ID-Code2
  0xE
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• Mechanical life, minimum
  1,000,000 Operations
• Connector position
  Bottom
• Height of sensor
  90 mm
• Restistance to shock
  30 g / 11 ms
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Outputs, DO 3
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Actuating play in direction of actuation
  5.5 mm
• Storage and transport temperature, maximum
  +85 °C
• Note (Relative humidity)
  non-condensing, non-icing
• Rated impulse withstand voltage Uimp
  0.8 kV
AS-i, ID-Code
0xB
AS-i Outputs, DO 1
No Function
Manual release
Yes
Length of sensor
30 mm
Width of sensor
130 mm
Switching frequency
1,000 /h
AS-i Current consumption, maximum
250 mA
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
Power to unlock
Yes
Clamping force
2,000 N
Ambient temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Degree of pollution to VDE 0100
3
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
Integral System Diagnostics, status
Yes
Standards
IEC 61508, EN 60947-5-1, EN 62026-2
Actuating speed, maximum
2 m/s
Latching force
30 N
Relative humidity, minimum
30 %
Degree of protection
IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage, minimum
26.5 VDC
AS-i Profile
S-7.B.F.E
AS-i Version
V 2.1
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P0
Actuator detected
AS-i Input module address
0
Reaction time, maximum
100 ms
Actuator monitored
Yes
Active principle
electromechanical
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Ambient temperature, maximum
+60 °C
Protection rating
II
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Specification
Safety-Slave
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Solenoid interlock locked
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error

AZM 161 B ST1-AS R Related Documents