AZM 161 Z ST1-AS RP Schmersal Safety Switch Interlocks

Product Details

• Active principle
  electromechanical
• Connector position
  Bottom
• Storage and transport temperature, minimum
  -25 °C
• Resistance to vibrations to EN 60068-2-6
  10 Hz ... 150 Hz, amplitude 0.35 mm
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i, ID-Code2
  0xE
• AS-i Input module address
  0
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Number of actuating directions
  3
• Relative humidity, minimum
  30 %
• Rated insulation voltage Ui
  32 VDC
• AS-i Current consumption, maximum
  100 mA
• AS-i, IO-Code
  0x7
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• AS-i Profile
  S-7.B.F.E
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Actuating speed, maximum
  2 m/s
• Height of sensor
  90 mm
Relative humidity, maximum
95 %
Restistance to shock
30 g / 11 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
Operating current
500 mA
Reaction time, maximum
100 ms
Latching force
30 N
Length of sensor
30 mm
Storage and transport temperature, maximum
+85 °C
AS-i Version
V 2.1
AS-i Outputs, DO 0
Solenoid control
AS-i Outputs, DO 3
No Function
Guard locking monitored
Yes
Clamping force
2,000 N
Width of sensor
130 mm
Protection rating
II
AS-i Specification
Safety-Slave
AS-i Outputs, DO 1
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Integral System Diagnostics, status
Yes
Gross weight
450 g
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Ambient temperature, maximum
+60 °C
Degree of pollution to VDE 0100
3
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 2
No Function
AS-i Parameter bits, P0
Actuator detected
Power to unlock
Yes
Actuating play in direction of actuation
5.5 mm
Degree of protection
IP67 to EN 60529
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency
1,000 /h
AS-i, ID-Code1
0xF
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Manual release
Yes
Mechanical life, minimum
1,000,000 Operations
Ambient temperature, minimum
-25 °C
Note (Relative humidity)
non-condensing, non-icing
Overvoltage category
III
AS-i, ID-Code
0xB
AS-i Parameter bits, P1
Solenoid interlock locked

AZM 161 Z ST1-AS RP Related Documents