AZM201B-I2-CC-T-1P2PW Schmersal Safety Switches

Product Details

• general information
  Individual coding, multiple teaching
• Safety functions
  Yes
• Actuating speed, maximum
  0.2 m/s
• Width of sensor
  40 mm
• Note (Relative humidity)
  non-condensing
• Operating voltage, maximum
  26.4 VDC
• Classification ZVEI CB24I, Source
  C2
• Voltage, Utilisation category DC13
  24 VDC
• Number of safety contacts
  2
• Cable section, maximum
  1.5 mm²
• Relative humidity, minimum
  30 %
• Degree of pollution to VDE 0100
  3
• Duration of risk, maximum
  200 ms
• Manual release
  Yes
• Terminal Connector
  Spring pulley connection
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Current consumption with solenoid ON, average
  200 mA
• Active principle
  RFID
• Coding level according to ISO 14119
  High
Integral System Diagnostics, status
Yes
Cable section, minimum
0.25 mm²
Storage and transport temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
No-load supply current I0
50 mA
Voltage drop Ud, maximum
4 V
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Mechanical life, minimum
1,000,000 Operations
Wire cross-section, minimum
23 AWG
Ambient temperature, maximum
+60 °C
Protection rating
III
Current consumption with solenoid ON, peak
700 mA / 100 ms
Current, Utilisation category DC13
0.05 A
Enclosure material
Glass-fibre, reinforced thermoplastic
Series-wiring
Yes
Clamping force, maximum Fmax
2,600 N
Height of sensor
220 mm
Rated insulation voltage Ui
32 VDC
Current leakage Ir
0.5 mA
Operating current
50 mA
Ambient temperature, minimum
-25 °C
Relative humidity, maximum
95 %
Gross weight
577 g
Time to readiness, maximum
4,000 ms
Actuator monitored
Yes
Short-circuit recognition
Yes
Clamping force in accordance with ISO14119 Fzh
2,000 N
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Length of sensor
50 mm
Rated impulse withstand voltage Uimp
0.8 kV
Operating voltage, minimum
20.4 VDC
Switching frequency, approx.
1 Hz
Classification ZVEI CB24I, Sink
C1, C2
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Short circuit detection
Yes
Latching force
30 N
Wire cross-section, maximum
15 AWG
Storage and transport temperature, maximum
+85 °C
Overvoltage category
III
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Rated operating current (safety outputs)
250 mA

AZM201B-I2-CC-T-1P2PW Related Documents