AZM201Z-I1-ST-T-AS-P Schmersal Safety Switch Interlocks

Product Details

• Duration of risk, maximum
  200 ms
• Integral System Diagnostics, status
  Yes
• Tightening torque for the fixing screws, maximum
  8 Nm
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• AS-i, ID-Code
  0xB
• AS-i Outputs, DO 1
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Latching force
  30 N
• Storage and transport temperature, maximum
  +85 °C
• AS-i Version
  V 3.0
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Input module address
  0
• Time to readiness, maximum
  4,000 ms
• Gross weight
  538.1 g
• Mechanical life, minimum
  1,000,000 Operations
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Ambient temperature, minimum
  -25 °C
• Degree of pollution to IEC/EN 60664-1
  3
• AS-i Parameter bits, P1
  Solenoid interlock locked
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Safety functions
Yes
Actuating speed, maximum
0.2 m/s
Note (Relative humidity)
non-condensing, non-icing
Switching frequency, maximum
1 Hz
AS-i Outputs, DO 3
No Function
Operating current
500 mA
Coding level according to ISO 14119
High
Power to unlock
Yes
Number of actuating directions
2
Relative humidity, maximum
95 %
Restistance to shock
30 g / 11 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, IO-Code
0x7
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Reaction time, maximum
100 ms
Manual release
Yes
Length of sensor
50 mm
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i, ID-Code1
0xF
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
RFID
Clamping force, maximum Fmax
2,600 N
Height of sensor
220 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage, minimum
26.5 VDC
AS-i, ID-Code2
0xE
AS-i Outputs, DO 2
No Function
Note (AS-i Parameter bits)
FID: periphery error
Enclosure material
Glass-fibre, reinforced thermoplastic
Guard locking monitored
Yes
general information
Individual coding
Latching
Yes
Width of sensor
40 mm
Relative humidity, minimum
10 %
Clamping force in accordance with ISO14119 Fzh
2,000 N
Storage and transport temperature, minimum
-25 °C
Protection rating
III
AS-i Profile
S-7.B.F.E
AS-i Specification
Safety-Slave
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Overvoltage category
III
AS-i Current consumption, maximum
100 mA
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P0
Safety guard and actuator detected

AZM201Z-I1-ST-T-AS-P Related Documents