AZM201Z-I2-SK-T-1P2PW Schmersal Safety Switches

Product Details

• Rated impulse withstand voltage Uimp
  0.8 kV
• Relative humidity, maximum
  95 %
• Wire cross-section, maximum
  15 AWG
• Integral System Diagnostics, status
  Yes
• Actuating speed, maximum
  0.2 m/s
• Manual release
  Yes
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Voltage, Utilisation category DC13
  24 VDC
• Current, Utilisation category DC13
  0.05 A
• Current leakage Ir
  0.5 mA
• Voltage drop Ud, maximum
  4 V
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Source
  C2
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Classification ZVEI CB24I, Sink
  C1, C2
• Operating current
  50 mA
• Switching frequency, approx.
  1 Hz
• No-load supply current I0
  50 mA
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Degree of pollution to VDE 0100
  3
Current consumption with solenoid ON, average
200 mA
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Overvoltage category
III
Rated insulation voltage Ui
32 VDC
Protection rating
III
Restistance to shock
30 g / 11 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+85 °C
Note (Relative humidity)
non-condensing
Relative humidity, minimum
30 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
-25 °C
Height of sensor
220 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Length of sensor
50 mm
Width of sensor
40 mm
Cable section, maximum
1.5 mm²
Wire cross-section, minimum
23 AWG
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Terminal Connector
Screw connection
Cable section, minimum
0.25 mm²
Latching force
30 N
Clamping force, maximum Fmax
2,600 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Mechanical life, minimum
1,000,000 Operations
Number of safety contacts
2
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Safety functions
Yes
Series-wiring
Yes
Power to unlock
Yes
Active principle
RFID
Short-circuit recognition
Yes
Short circuit detection
Yes
Time to readiness, maximum
4,000 ms
Guard locking monitored
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Duration of risk, maximum
200 ms
general information
Individual coding, multiple teaching
Gross weight
586 g
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Coding level according to ISO 14119
High

AZM201Z-I2-SK-T-1P2PW Related Documents