AZM201Z-SK-T-1P2PW-A Schmersal Safety Switches

Product Details

• Series-wiring
  Yes
• Latching force
  30 N
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Short circuit detection
  Yes
• Cable section, minimum
  0.25 mm²
• Ambient temperature, minimum
  -25 °C
• Relative humidity, maximum
  95 %
• Operating voltage, minimum
  20.4 VDC
• Rated operating current (safety outputs)
  250 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Time to readiness, maximum
  4,000 ms
• Safety functions
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Height of sensor
  220 mm
• Note (Relative humidity)
  non-condensing
• No-load supply current I0
  50 mA
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current leakage Ir
  0.5 mA
• Gross weight
  584.3 g
Active principle
RFID
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Length of sensor
50 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, maximum
26.4 VDC
Classification ZVEI CB24I, Source
C2
Power to lock
Yes
Integral System Diagnostics, status
Yes
Actuating speed, maximum
0.2 m/s
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Protection rating
III
Current consumption with solenoid ON, average
200 mA
general information
Universal coding
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Number of safety contacts
2
Wire cross-section, minimum
23 AWG
Ambient temperature, maximum
+60 °C
Restistance to shock
30 g / 11 ms
Degree of pollution to VDE 0100
3
Current, Utilisation category DC13
0.05 A
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Duration of risk, maximum
200 ms
Clamping force, maximum Fmax
2,600 N
Wire cross-section, maximum
15 AWG
Storage and transport temperature, maximum
+85 °C
Rated insulation voltage Ui
32 VDC
Current consumption with solenoid ON, peak
700 mA / 100 ms
Voltage drop Ud, maximum
4 V
Guard locking monitored
Yes
Coding level according to ISO 14119
Low
Mechanical life, minimum
1,000,000 Operations
Cable section, maximum
1.5 mm²
Relative humidity, minimum
30 %
Rated impulse withstand voltage Uimp
0.8 kV
Operating current
50 mA
Manual release
Yes
Short-circuit recognition
Yes
Terminal Connector
Screw connection
Width of sensor
40 mm
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC13
24 VDC

AZM201Z-SK-T-1P2PW-A Related Documents