RSS 36-D-ST Schmersal Electronic Components

Product Details

• Active principle
  RFID
• Time to readiness, maximum
  2,000 ms
• Number of semi-conductor outputs with signaling function
  1
• Mounting
  A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
• Ensured switch distance OFF Sar
  20 mm
• Ambient temperature, maximum
  +70 °C
• Degree of pollution to VDE 0100
  3
• Rated insulation voltage Ui
  32 VDC
• Output current, (fail-safe output), maximum
  0.25 A
• Coding level according to ISO 14119
  Low
• Short circuit detection
  Yes
• Number of LEDs
  3
• Hysteresis (Switch distance), maximum
  2 mm
• Note
  The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• general information
  Universal coding
• Integral System Diagnostics, status
  Yes
• Actuating panels
  lateral
• Height of sensor
  25 mm
• Installation conditions (mechanical)
  not flush
Reaction time, maximum
100 ms
Cascadable
Yes
Switch distance
12 mm
Length of sensor
22 mm
Material temperature resistance of the cable (at rest), minimum
-30 °C
Sensor topology
Sensor for series wiring
Housing construction form
Block
Duration of risk, maximum
200 ms
Repeat accuracy R R
0.5 mm
Width of sensor
106.3 mm
Storage and transport temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
0.8 kV
Standards
IEC 60947-5-3
Safety functions
Yes
Ensured switch distance ON Sao
10 mm
Storage and transport temperature, maximum
+85 °C
Rated operating voltage, maximum
26.4 VDC
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC12
24 VDC
Number of fail-safe digital outputs
2
Voltage type
DC (direct current)
Voltage drop Ud, maximum
2 V
Short-circuit recognition
Yes
Degree of protection
IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
EMC rating
IEC 60947-3
Gross weight
80 g
Ambient temperature, minimum
-25 °C
Current, Utilisation category DC13
0.05 A
Restistance to shock
30 g / 11 ms
Material temperature resistance of the cable (in motion), minimum
-10 °C
Rated operating voltage
24 VDC −15 % / +10 %
Required rated short-circuit current to EN 60947-5-1
100 A
Versions
p-type
Current leakage Ir
0.5 mA
Overvoltage category
III
Operating current
600 mA
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Active area
lateral
Material temperature resistance (long-term), maximum
+105 °C
No-load supply current I0
100 mA
Rated operating current (safety outputs)
250 mA
Current, Utilisation category DC12
0.05 A
Interfering radiation
IEC 61000-6-4
Diagnostic output
Yes
Terminal Connector
Connector M12, 8-pole
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Protection rating
III

RSS 36-D-ST Related Documents