RSS260-I2-D-LSTM12-8-0,25M Schmersal Electronic Components

Product Details

• EMC rating
  IEC 60947-3
• Interfering radiation
  IEC 61000-6-4
• Short circuit detection
  Yes
• Safety functions
  Yes
• Length of sensor
  29.5 mm
• Rated operating voltage, minimum
  20.4 VDC
• No-load supply current I0
  100 mA
• Current, Utilisation category DC12
  0.05 A
• Gross weight
  161 g
• Duration of risk, maximum
  200 ms
• Storage and transport temperature, minimum
  -25 °C
• Rated insulation voltage Ui
  32 VDC
• Current leakage Ir
  0.5 mA
• Operating current
  50 mA
• Enclosure material
  Plastic, thermoplastic, self-extinguishing
• Hysteresis (Switch distance), maximum
  2 mm
• Rated impulse withstand voltage Uimp
  0.8 kV
• general information
  Individual coding, multiple teaching
• Reaction time, maximum
  100 ms
• Repeat accuracy R R
  0.5 mm
Ensured switching distance OFF, front
18 mm
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Ensured switching distance ON, front
10 mm
Storage and transport temperature, maximum
+85 °C
Rated operating voltage, maximum
26.4 VDC
Voltage, Utilisation category DC13
24 VDC
Standards
IEC 60947-5-3
Number of poles
8
Coding level according to ISO 14119
High
Ensured switch distance OFF Sar, lateral
15 mm
Ambient temperature, maximum
+65 °C
Ambient temperature, minimum
-25 °C
Degree of pollution to VDE 0100
3
Voltage drop Ud, maximum
2 V
Housing construction form
Block
Time to readiness, maximum
2,000 ms
Actuating panels
lateral, front side
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Terminal Connector
Connector M8, 8-pole
Overvoltage category
III
Switching frequency, approx.
1 Hz
Current, Utilisation category DC13
0.05 A
Active principle
RFID
Short-circuit recognition
Yes
Ensured switching distance ON, side
6 mm
Height of sensor
18 mm
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Voltage type
DC (direct current)
Voltage, Utilisation category DC12
24 VDC
Installation conditions (mechanical)
not flush
Active area
lateral, front
Mounting
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Width of sensor
39.2 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Rated operating voltage
24 VDC -15% / +10%
Versions
p-type

RSS260-I2-D-LSTM12-8-0,25M Related Documents