RSS260-I2-D-ST Schmersal Safety Switches

Product Details

• general information
  Individual coding, multiple teaching
• Active principle
  RFID
• Cascadable
  Yes
• Repeat accuracy R R
  0.5 mm
• Switch distance Sn
  front 12 mm, lateral 9 mm
• Terminal Connector
  Connector M8
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Degree of pollution to VDE 0100
  3
• Operating current
  50 mA
• Current, Utilisation category DC13
  0.05 A
• Reaction time, maximum
  100 ms
• Installation conditions (mechanical)
  not flush
• Integral System Diagnostics, status
  Yes
• Ensured switching distance ON, front
  10 mm
• Ambient temperature, maximum
  +65 °C
• No-load supply current I0
  100 mA
• Voltage drop Ud, maximum
  2 V
• Actuating panels
  lateral, front side
• Standards
  IEC 60947-5-3
• Duration of risk, maximum
  200 ms
Ensured switching distance OFF, front
18 mm
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Voltage, Utilisation category DC13
24 VDC
EMC rating
IEC 60947-3
Sensor topology
Sensor for series wiring
Time to readiness, maximum
2,000 ms
Number of fail-safe digital outputs
2
Ensured switching distance ON, side
6 mm
Height of sensor
18 mm
Voltage type
DC (direct current)
Switching frequency, approx.
1 Hz
Storage and transport temperature, maximum
+85 °C
Coding level according to ISO 14119
High
Safety functions
Yes
Number of semi-conductor outputs with signaling function
1
Active area
lateral, front
Mounting
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Length of sensor
29.5 mm
Overvoltage category
III
Current leakage Ir
0.5 mA
Housing construction form
Block
Diagnostic output
Yes
Hysteresis (Switch distance), maximum
2 mm
Ensured switch distance OFF Sar, lateral
15 mm
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Rated operating voltage, minimum
20.4 VDC
Versions
p-type
Interfering radiation
IEC 61000-6-4
Enclosure material
Plastic, thermoplastic, self-extinguishing
Short circuit detection
Yes
Number of LEDs
3
Width of sensor
39.2 mm
Storage and transport temperature, minimum
-25 °C
Rated operating voltage, maximum
26.4 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Voltage, Utilisation category DC12
24 VDC
Gross weight
61 g
Short-circuit recognition
Yes
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Restistance to shock
30 g / 11 ms
Rated operating voltage
24 VDC -15% / +10%
Current, Utilisation category DC12
0.05 A

RSS260-I2-D-ST Related Documents