RSS260-I2-SD-ST Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  High
• Active principle
  RFID
• Short circuit detection
  Yes
• Cascadable
  Yes
• Note (Repeat accuracy R)
  Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
• Note
  The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
• Sensor topology
  Sensor for series wiring
• Reaction time, maximum
  100 ms
• Integral System Diagnostics, status
  Yes
• Repeat accuracy R R
  0.5 mm
• Ensured switching distance ON, side
  6 mm
• Housing construction form
  Block
• Standards
  IEC 60947-5-3
• Diagnostic output
  Yes
• Hysteresis (Switch distance), maximum
  2 mm
• Ensured switching distance OFF, front
  18 mm
• Width of sensor
  39.2 mm
• Time to readiness, maximum
  2,000 ms
• Short-circuit recognition
  Yes
• Number of semi-conductor outputs with signaling function
  1
Active area
lateral, front
Terminal Connector
Connector M8
Storage and transport temperature, minimum
-25 °C
Enclosure material
Plastic, thermoplastic, self-extinguishing
Gross weight
60 g
Actuating panels
lateral, front side
Number of LEDs
3
Switch distance Sn
front 12 mm, lateral 9 mm
Installation conditions (mechanical)
not flush
Serial diagnostics
Yes
Safety functions
Yes
Number of Series-wiring of sensors
31
Ensured switching distance ON, front
10 mm
general information
Individual coding, multiple teaching
Duration of risk, maximum
200 ms
Number of fail-safe digital outputs
2
Mounting
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Height of sensor
18 mm
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Current, Utilisation category DC13
0.25 A
Ambient temperature, maximum
+65 °C
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Operating current
150 mA
Ensured switch distance OFF Sar, lateral
15 mm
Overvoltage category
III
Versions
p-type
Storage and transport temperature, maximum
+85 °C
Rated operating voltage
24 VDC -15% / +10%
Switching frequency, approx.
1 Hz
Current leakage Ir
0.5 mA
Interfering radiation
IEC 61000-6-4
Length of sensor
29.5 mm
No-load supply current I0
100 mA
Rated operating voltage, maximum
26.4 VDC
EMC rating
IEC 60947-3
Ambient temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
0.8 kV
Voltage, Utilisation category DC12
24 VDC
Voltage drop Ud, maximum
2 V
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Degree of pollution to VDE 0100
3
Voltage type
DC (direct current)
Current, Utilisation category DC12
0.25 A
Rated insulation voltage Ui
32 VDC
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC

RSS260-I2-SD-ST Related Documents