RSS16-I2-D-CC Schmersal Safety Switches

Product Details

• Height of sensor
  30 mm
• Rated insulation voltage Ui
  32 VDC
• No-load supply current I0
  100 mA
• Voltage, Utilisation category DC13
  24 VDC
• Hysteresis (Switch distance), maximum
  2 mm
• Length of sensor
  91 mm
• Rated impulse withstand voltage Uimp
  0.8 kV
• Rated operating voltage, minimum
  20.4 VDC
• EMC rating
  IEC 60947-3
• Current, Utilisation category DC13
  0.05 A
• Ensured switch distance ON Sao
  12 mm
• Ambient temperature, minimum
  -25 °C
• Storage and transport temperature, minimum
  -25 °C
• Overvoltage category
  III
• Output current, (fail-safe output), maximum
  1 A
• Interfering radiation
  IEC 61000-6-4
• Switch distance
  15 mm
• Terminal Connector
  Spring pulley connection
• Voltage type
  DC (direct current)
• Rated operating current (safety outputs)
  1,000 mA
Voltage drop Ud, maximum
2 V
Gross weight
275 g
Tightening torque of nuts, maximum
2 Nm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Protection rating
0
Required rated short-circuit current to EN 60947-5-1
100 A
Versions
p-type
Sensor topology
Sensor for series wiring
Ensured switch distance OFF Sar
30 mm
Width of sensor
52 mm
Storage and transport temperature, maximum
+85 °C
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC12
24 VDC
Mounting
2 x M5, Cylinder head screw
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Degree of pollution to VDE 0100
3
Rated operating voltage, maximum
26.4 VDC
Current, Utilisation category DC12
0.05 A
Repeat accuracy R R
0.5 mm
Restistance to shock
30 g / 11 ms
Ambient temperature, maximum
+70 °C
Operating current
50 mA
Current leakage Ir
0.5 mA
Standards
IEC 60947-5-3
Safety functions
Yes
Active area
lateral, front side, cover-side
Installation conditions (mechanical)
not flush
Short circuit detection
Yes
Number of semi-conductor outputs with signaling function
1
Coding level according to ISO 14119
High
Active principle
RFID
Integral System Diagnostics, status
Yes
general information
Individual coding, multiple teaching
Short-circuit recognition
Yes
Number of LEDs
2
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Housing construction form
Block
Cascadable
Yes
Reaction time, maximum
100 ms
Diagnostic output
Yes
Number of fail-safe digital outputs
2
Time to readiness, maximum
2,000 ms
Series-wiring
Yes
Duration of risk, maximum
200 ms
Actuating panels
front side, rear, from head

RSS16-I2-D-CC Related Documents