RSS16-I2-D-R-ST8H Schmersal Safety Switches

Product Details

• Sensor topology
  Sensor for series wiring
• Duration of risk, maximum
  200 ms
• Integral System Diagnostics, status
  Yes
• Ensured switch distance OFF Sar
  30 mm
• Storage and transport temperature, minimum
  -25 °C
• Rated operating voltage, minimum
  20.4 VDC
• Active principle
  RFID
• Latching
  Yes
• Safety functions
  Yes
• Actuating panels
  front side, rear, from head
• Note
  The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
• Ambient temperature, minimum
  -25 °C
• Overvoltage category
  III
• general information
  Individual coding, multiple teaching
• Time to readiness, maximum
  2,000 ms
• Number of fail-safe digital outputs
  2
• Terminal Connector
  Connector M12, 8-pole
• Current, Utilisation category DC12
  0.05 A
• Coding level according to ISO 14119
  High
• Series-wiring
  Yes
Repeat accuracy R R
0.5 mm
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Installation conditions (mechanical)
not flush
Diagnostic output
Yes
Cascadable
Yes
Hysteresis (Switch distance), maximum
2 mm
Versions
p-type
Short-circuit recognition
Yes
Active area
lateral, front side, cover-side
Ensured switch distance ON Sao
5 mm
Rated insulation voltage Ui
32 VDC
Rated operating current (safety outputs)
1,000 mA
Current, Utilisation category DC13
0.05 A
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Short circuit detection
Yes
Tightening torque of nuts, maximum
2 Nm
Protection rating
0
Rated operating voltage, maximum
26.4 VDC
Voltage, Utilisation category DC12
24 VDC
Gross weight
275 g
Standards
IEC 60947-5-3
Number of LEDs
2
Switch distance
15 mm
Width of sensor
52 mm
Rated impulse withstand voltage Uimp
0.8 kV
Current leakage Ir
0.5 mA
Operating current
50 mA
Housing construction form
Block
Reaction time, maximum
100 ms
Number of semi-conductor outputs with signaling function
1
Mounting
2 x M5, Cylinder head screw
Height of sensor
30 mm
Length of sensor
91 mm
Degree of pollution to VDE 0100
3
Output current, (fail-safe output), maximum
1 A
Degree of protection
IP65 to EN 60529, IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, maximum
+70 °C
Storage and transport temperature, maximum
+85 °C
No-load supply current I0
100 mA
Voltage type
DC (direct current)
Switching frequency, approx.
1 Hz
Voltage drop Ud, maximum
2 V
Interfering radiation
IEC 61000-6-4
Voltage, Utilisation category DC13
24 VDC
EMC rating
IEC 60947-3

RSS16-I2-D-R-ST8H Related Documents