AES 7112.3 24 VAC Schmersal Electronic Components

Product Details

• Integral System Diagnostics, status
  Yes
• Wire breakage detection
  Yes
• Width
  105 mm
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Rated impulse withstand voltage Uimp
  4 kV
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Current, Utilisation category DC13
  2 A
• Voltage, Utilisation category DC12
  24 VDC
• Material of the contacts, electrical
  AgSn0
• Height
  96 mm
• Automatic reset function
  Yes
• Number of openers
  2
• Degree of protection of clips or terminals
  IP20
• Overvoltage category
  III
• Electrical power consumption
  1.5 W
• Voltage, Utilisation category AC15
  250 VAC
• Current, Utilisation category DC12
  0.1 A
• Stop-Category
  0
• Number of LEDs
  1
• Depth
  58 mm
Storage and transport temperature, minimum
-25 °C
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Drop-out delay in case of power failure, typically
80 ms
Reset after disconnection of supply voltage
Yes
Number of safety contacts
1
Degree of protection of the enclosure
IP40
Cable section, maximum
1.5 mm²
Thermal test current
5 A
Gross weight
140 g
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Terminal Connector
Screw connection, rigid or flexible
Ambient temperature, maximum
+55 °C
Frequency range
50 Hz, 60 Hz
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Mechanical life, minimum
3,000,000 Operations
Short-circuit recognition
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Degree of protection of the mounting space
IP54
Storage and transport temperature, maximum
+70 °C
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Degree of pollution to IEC/EN 60664-1
2
Switching capacity, maximum
24 VDC
Note (Contact resistance)
in new state
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category AC-15
2 A
Rated operating voltage
24 VAC
Pull-in delay at RESET, typically
20 ms
Contact resistance, maximum
0.1 Ω
Pull-in delay at automatic start, maximum, typically
100 ms
Conduction resistance, maximum
40 Ω
Number of shutters
4
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Switching capacity, minimum
10 mA
EMC rating
EMC-Directive
Ambient temperature, minimum
+0 °C
Restistance to shock
30 g / 11 ms
Drop-out delay in case of emergency, typically
20 ms

AES 7112.3 24 VAC Related Documents