AZM201B-I1-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• Standards
  EN ISO 13849-1, IEC 61508, IEC 60947-5-3
• Latching
  Yes
• Length of sensor
  50 mm
• Width of sensor
  40 mm
• Ambient temperature, minimum
  -25 °C
• Degree of pollution to IEC/EN 60664-1
  3
• AS-i, IO-Code
  0x7
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• Actuator monitored
  Yes
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Ambient temperature, maximum
  +60 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Current consumption, maximum
  100 mA
• AS-i Outputs, DO 3
  No Function
• AS-i Input module address
  0
• Gross weight
  538.5 g
• Manual release
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
Restistance to shock
30 g / 11 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code1
0xF
AS-i Parameter bits, P0
Safety guard and actuator detected
Note (AS-i Parameter bits)
FID: periphery error
Reaction time, maximum
100 ms
Safety functions
Yes
Tightening torque for the fixing screws, maximum
8 Nm
Note (Relative humidity)
non-condensing, non-icing
Rated insulation voltage Ui
32 VDC
AS-i Version
V 3.0
AS-i Outputs, DO 2
No Function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Enclosure material
Glass-fibre, reinforced thermoplastic
Integral System Diagnostics, status
Yes
Latching force
30 N
Relative humidity, minimum
10 %
Overvoltage category
III
AS-i Specification
Safety-Slave
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
general information
Individual coding
Time to readiness, maximum
4,000 ms
Power to lock
Yes
Clamping force in accordance with ISO14119 Fzh
2,000 N
Storage and transport temperature, maximum
+85 °C
Protection rating
III
Switching frequency, maximum
1 Hz
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
RFID
Number of actuating directions
2
Actuating speed, maximum
0.2 m/s
Relative humidity, maximum
95 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code2
0xE
AS-i Parameter bits, P1
Solenoid interlock locked
Coding level according to ISO 14119
High
Duration of risk, maximum
200 ms
Mechanical life, minimum
1,000,000 Operations
Height of sensor
220 mm
Storage and transport temperature, minimum
-25 °C
AS-i Operating voltage, minimum
26.5 VDC
AS-i, ID-Code
0xB
AS-i Outputs, DO 0
Solenoid control
Operating current
500 mA

AZM201B-I1-ST-T-AS-A-P Related Documents