AZM201B-I2-ST-T-AS-P Schmersal Safety Switch Interlocks

Product Details

• Coding level according to ISO 14119
  High
• general information
  Individual coding, multiple teaching
• Latching
  Yes
• Actuator monitored
  Yes
• Power to unlock
  Yes
• Manual release
  Yes
• Safety functions
  Yes
• Integral System Diagnostics, status
  Yes
• Standards
  EN ISO 13849-1, IEC 61508, IEC 60947-5-3
• Mechanical life, minimum
  1,000,000 Operations
• Gross weight
  538.2 g
• Time to readiness, maximum
  4,000 ms
• Number of actuating directions
  2
• Duration of risk, maximum
  200 ms
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Reaction time, maximum
  100 ms
• Clamping force, maximum Fmax
  2,600 N
• Tightening torque for the fixing screws, maximum
  8 Nm
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Active principle
  RFID
Latching force
30 N
Actuating speed, maximum
0.2 m/s
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Length of sensor
50 mm
Width of sensor
40 mm
Height of sensor
220 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+60 °C
Relative humidity, minimum
10 %
Note (Relative humidity)
non-condensing, non-icing
Relative humidity, maximum
95 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Protection rating
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Overvoltage category
III
Degree of pollution to IEC/EN 60664-1
3
Switching frequency, maximum
1 Hz
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 3
No Function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
AS-i Operating voltage, minimum
26.5 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P0
Safety guard and actuator detected
Operating current
500 mA
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Outputs, DO 0
Solenoid control
AS-i Parameter bits, P2
Magnet voltage in tolerance range
AS-i Current consumption, maximum
100 mA
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Input module address
0
AS-i Version
V 3.0
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Solenoid interlock locked
AS-i, ID-Code
0xB
AS-i Outputs, DO 1
No Function
Note (AS-i Parameter bits)
FID: periphery error
AS-i Specification
Safety-Slave
AS-i, ID-Code2
0xE
AS-i Parameter bits, P3
Internal device error (FID)
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

AZM201B-I2-ST-T-AS-P Related Documents