AZM300B-I1-ST-AS-A-P Schmersal Safety Switches

Product Details

• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Mechanical life, minimum
  1,000,000 Operations
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Version
  V 3.0
• AS-i Parameter bits, P2
  Auxiliary voltage in
• Reaction time, maximum
  120 ms
• general information
  Individual coding
• Ensured switch distance ON Sao
  1 mm
• Clamping force
  1,150 N
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529, IP69K to DIN 40050-9
• Overvoltage category
  III
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P1
  Solenoid interlock locked
• AS-i Input module address
  0
• Coding level according to ISO 14119
  High
• Manual release
  Yes
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Height of sensor
  102.6 mm
• Protection rating
  II
AS-i Current consumption, maximum
100 mA
AS-i Outputs, DO 3
No Function
Operating current
300 mA
Duration of risk, maximum
200 ms
Integral System Diagnostics, status
Yes
Ensured switch distance OFF Sar
20 mm
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 1
No Function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Active principle
RFID
Safety functions
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Storage and transport temperature, minimum
-10 °C
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Outputs, DO 0
Solenoid control
AS-i Parameter bits, P3
Internal device error (FID)
Power to lock
Yes
Latching
Yes
Latching force, adjustable, position 2
50 N
Ambient temperature, minimum
+0 °C
Degree of pollution to VDE 0100
3
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Actuator monitored
Yes
Number of actuating directions
3
Latching force, adjustable, position 1
25 N
Width of sensor
87.4 mm
Restistance to shock
30 g / 11 ms
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
Safety guard closed and can be locked
Standards
IEC 61508, EN 60947-5-1, EN ISO 14119
Time to readiness, maximum
5,000 ms
Switch distance
2 mm
Length of sensor
34.4 mm
Storage and transport temperature, maximum
+90 °C
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 2
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

AZM300B-I1-ST-AS-A-P Related Documents